New 4wd rolling road Aberdeen?
#1
New 4wd rolling road Aberdeen?
Not yet, but likely in the near future.
How much interest/use would this get?
A friend has asked me to post on here and gauge interest.
It would be a fully specced, up to date piece of kit (with a very big cooling fan!!!!!!!! )
Knowledgeable operators.
Located at a multi-marque performance tuners, but rapidly becoming scoob specialists.
Thoughts?
Cheers.
How much interest/use would this get?
A friend has asked me to post on here and gauge interest.
It would be a fully specced, up to date piece of kit (with a very big cooling fan!!!!!!!! )
Knowledgeable operators.
Located at a multi-marque performance tuners, but rapidly becoming scoob specialists.
Thoughts?
Cheers.
#4
Originally Posted by WUZ
Bloody hell GAV, I thought you were going to wait a while!
Good news (assuming the discount is there wink, wink)
Russell
Good news (assuming the discount is there wink, wink)
Russell
He's in his bed sick today.........
(oh ****, I am not supposed to know that, am I?! )
#6
Scooby Regular
4wd rollin road
hope you have lots of pennys as the one that you would need is the
MAHA LPS 3000/4 150MPH/1 SET - 260KW 1 SET -520KW @£81,000+vat Without the air coolers fans the cheapest one starting @ £3,000k+vat
Me been looking at prices for them
There is a SUN 4wd rollin road for sale on e-bay t.d.i's old unit for sale nobody has put a bid in yet starting at 8k
grant
MAHA LPS 3000/4 150MPH/1 SET - 260KW 1 SET -520KW @£81,000+vat Without the air coolers fans the cheapest one starting @ £3,000k+vat
Me been looking at prices for them
There is a SUN 4wd rollin road for sale on e-bay t.d.i's old unit for sale nobody has put a bid in yet starting at 8k
grant
Trending Topics
#11
okay okay
Okay okay, it's leaked out, we're getting a 4wd dyno very shortly - ie up and working within the next three months. Wasn't going to tell anyone until I was 100% sure, well now I am.
LOL, the wee bike's still going well.
For all of you who doesn't know what the "wee bike" is, it's the wee bike that that sits outside my workshop. Goes really well!
Gavin
Hows the wee bike?
For all of you who doesn't know what the "wee bike" is, it's the wee bike that that sits outside my workshop. Goes really well!
Gavin
#12
Scooby Regular
Join Date: Mar 2002
Location: Aberdeen
Posts: 1,008
Likes: 0
Received 0 Likes
on
0 Posts
Good idea but dont use maha
I hope you aint going for the maha unit?
I spent a lot of time looking into the feasibility of putting such a piece of kit into Aberdeen..
Imo the Dyno Dynamics RR is far superior- check this out
http://www.g-force-motorsport.co.uk/rolling.html
a far far superior piece of kit and what we were going to go for before the idea was shelved...
I have a contactand the prices are comparable even though it comes from Australia
Pm me for any info if you want
Foz
I spent a lot of time looking into the feasibility of putting such a piece of kit into Aberdeen..
Imo the Dyno Dynamics RR is far superior- check this out
http://www.g-force-motorsport.co.uk/rolling.html
a far far superior piece of kit and what we were going to go for before the idea was shelved...
I have a contactand the prices are comparable even though it comes from Australia
Pm me for any info if you want
Foz
#18
Originally Posted by foz01
Dastek???
I may have to change the website a wee bit for more subaru needs, it's just a matter of time though.... I'll get round to it
Gav
#21
Scooby Regular
Join Date: Dec 2002
Location: P1 Aberdeen.
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
They usually do both, a few runs on the road and a few on the dyno.
Using the dyno means less time doing 150mph on the road which can be very dodgy for the mappers to say the least.
Using the dyno means less time doing 150mph on the road which can be very dodgy for the mappers to say the least.
#23
Approx 8-10 weeks away
I'll be mapping the cars on the rollers as the setup I will have should be extremely close to road conditions.
I have looked at all (well most) of the RR's in the world and the Dastek one is by far the best I have seen.
I think (hope) this is what Aberdeen has been waiting for for ages and I hope that it can come in useful for you all.
I'll be mapping the cars on the rollers as the setup I will have should be extremely close to road conditions.
I have looked at all (well most) of the RR's in the world and the Dastek one is by far the best I have seen.
I think (hope) this is what Aberdeen has been waiting for for ages and I hope that it can come in useful for you all.
Thread
Thread Starter
Forum
Replies
Last Post