Mapping options local to northants
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: May 2007
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
Mapping options local to northants
I'm looking into mapping my05 sti ppp , ATM it's running the standard prodrive sport cat and exhaust system , I'm told this will be fine for a stage 1 map ?? , only other mods it's got are a forge recirc valve and a k&n typhoon induction kit , both of which came with the car , worth keeping them on ? Any bolt on stuff I should be looking at before a map ? Hoping to get around 330-340bhp if poss
Also what are my options close to northants for mapping and what map/software should I be looking at
Any advice welcome
Thanks
Also what are my options close to northants for mapping and what map/software should I be looking at
Any advice welcome
Thanks
#2
Scooby Regular
Get in touch with API in Harbury they have a recommended mapper and do some lovely engine work. Finch Motorsport are nearby too, they would have a recommended person also I imagine.
Also remember a lot of mappers travel, such as JGM.
Also remember a lot of mappers travel, such as JGM.
#3
Scooby Regular
Yes keep them on. Forge recirc is a nice piece of kit, nowt wrong with your air intake there. You could try uprating the fuel pump and even look at a decat if that takes your fancy - of course not legal for road use, ahem.
If you want a lot more power than what you are aiming for, you'll probably need to uprate injectors as well as the above and go for a bigger turbo.
Would probably recommend an ECUtek system for your car, plenty enough there for a road car even with track use. Other systems come with drawbacks.
If you want a lot more power than what you are aiming for, you'll probably need to uprate injectors as well as the above and go for a bigger turbo.
Would probably recommend an ECUtek system for your car, plenty enough there for a road car even with track use. Other systems come with drawbacks.
Trending Topics
#14
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: Moved to the Darkside
Posts: 5,034
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking into mapping my05 sti ppp , ATM it's running the standard prodrive sport cat and exhaust system , I'm told this will be fine for a stage 1 map ?? , only other mods it's got are a forge recirc valve and a k&n typhoon induction kit , both of which came with the car , worth keeping them on ? Any bolt on stuff I should be looking at before a map ? Hoping to get around 330-340bhp if poss
Also what are my options close to northants for mapping and what map/software should I be looking at
Any advice welcome
Thanks
Also what are my options close to northants for mapping and what map/software should I be looking at
Any advice welcome
Thanks
As above, I wish I was lucky enough to have someone as good as Paul Blamire on my doorstep
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM