How does hawkeye rear Defusser screw into blob eye?
#1
Scooby Regular
Thread Starter
Join Date: Mar 2013
Location: Slough
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
How does hawkeye rear Defusser screw into blob eye?
Just brought a used rear Defusser from a hawkeye to install on my blob?
It came with 5 bolts. Does anyone know on the hawkeye does it screw into some nuts? I
I know that the holes for the rear are on the metal bracket behind the bumper and that 3 holes have to be drilled close the wheel well. Any thing else I am missing?
Regards
It came with 5 bolts. Does anyone know on the hawkeye does it screw into some nuts? I
I know that the holes for the rear are on the metal bracket behind the bumper and that 3 holes have to be drilled close the wheel well. Any thing else I am missing?
Regards
#6
Scooby Regular
Thread Starter
Join Date: Mar 2013
Location: Slough
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
It's for a non wide track and it's the oem subaru part.
The metal bracket behind the bumper already has the mounting holes. So I assume all that's needed is holes in the wheel well?
Tubby tommy what's the simple fit?
The metal bracket behind the bumper already has the mounting holes. So I assume all that's needed is holes in the wheel well?
Tubby tommy what's the simple fit?
#7
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Get the Cusco brace, if it's still available, Gary. Saves you drilling into the spare wheel well. It mounts under the ARB brackets.
Then fix it to your rear bumper, if as mentioned above the bracket is already there. Mine being an early car, I had to wait well over a month for the bracket from Japan.
Then fix it to your rear bumper, if as mentioned above the bracket is already there. Mine being an early car, I had to wait well over a month for the bracket from Japan.
Trending Topics
#10
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Mine is an early classic, so needed a bracket from either Cusco, or Subaru - I forget which - to mount it to the bumper.
There isn't a bolt in the middle, it's just a recess.
#13
Scooby Regular
Thread Starter
Join Date: Mar 2013
Location: Slough
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Now I am even more confused. If there was no Cusco bar than how does the front of the defusser mount to the car? As the front bracket is only there if the Cusco bar is installed.
Anyone with a hawkeye can check for me? Or anyone with a blob that has done this?
Regards.
Anyone with a hawkeye can check for me? Or anyone with a blob that has done this?
Regards.
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 07:28 PM