How does hawkeye rear Defusser screw into blob eye?
 

Just brought a used rear Defusser from a hawkeye to install on my blob?

It came with 5 bolts. Does anyone know on the hawkeye does it screw into some nuts? I

I know that the holes for the rear are on the metal bracket behind the bumper and that 3 holes have to be drilled close the wheel well. Any thing else I am missing?

Regards

I'm looking to fit one of these aswell, so a guide would be handy if anyone has one

OEM one Gary?

Yes mate

Only on widetrack bumpers as they have the holes.
Still a simple fit on narrow track ones.

It's for a non wide track and it's the oem subaru part.

The metal bracket behind the bumper already has the mounting holes. So I assume all that's needed is holes in the wheel well?

Tubby tommy what's the simple fit?

Get the Cusco brace, if it's still available, Gary. Saves you drilling into the spare wheel well. It mounts under the ARB brackets.

http://i69.photobucket.com/albums/i7...ffuser0009.jpg

http://i69.photobucket.com/albums/i7...teline0010.jpg

http://i69.photobucket.com/albums/i7...8Cusco0006.jpg

Then fix it to your rear bumper, if as mentioned above the bracket is already there. Mine being an early car, I had to wait well over a month for the bracket from Japan.

How's did you attach the other screws furthest from the bumper for the rear defusser?

did you need to drill holes?

From what I can see there are two holes closest to the rear bumper and one hole in the middle and two further back.

No holes drilled. The Cusco bar has captive nuts for the 2 bolts nearest to the diff.

Mine is an early classic, so needed a bracket from either Cusco, or Subaru - I forget which - to mount it to the bumper.

There isn't a bolt in the middle, it's just a recess.

Cheers Micky, will look into that

:)

http://www.ebay.co.uk/itm/Subaru-STi...item2c6e01c5e8

https://fbcdn-sphotos-h-a.akamaihd.n...27e724cfccc89b

https://fbcdn-sphotos-h-a.akamaihd.n...e7a7d0a4be0071

https://fbcdn-sphotos-h-a.akamaihd.n...0045a4e47ebe86

https://fbcdn-sphotos-h-a.akamaihd.n...617ecfd8d9bd68

https://fbcdn-sphotos-h-a.akamaihd.n...1661c8f51f1ed1

https://fbcdn-sphotos-h-a.akamaihd.n...861664a4d5845b

https://fbcdn-sphotos-h-a.akamaihd.n...30d555155942ee

https://fbcdn-sphotos-h-a.akamaihd.n...45b47a60d73f8e

https://fbcdn-sphotos-h-a.akamaihd.n...e5561aafc8f7d8

Now I am even more confused. If there was no Cusco bar than how does the front of the defusser mount to the car? As the front bracket is only there if the Cusco bar is installed.

Anyone with a hawkeye can check for me? Or anyone with a blob that has done this?

Regards.

No idea mate, mines a Classic.