237.85MPH\1048BHP Nissan GTR anyone??
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Wilts
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
SVM built- Forged 3.8 Long rod
Custom heads & cams
Turbo- Garrett GT3071R ball bearing Core Assembly with Phosphor Bronze Motorsport Bearing Carriers. GT30 Inconel – 84 Trim Larger Shaft Wheel. Billet Compressor Wheel – 73mm High Flow – Extended Tip
Marston Intercooler. 80mm ic pipes. 70mm Billet Throttle bodies
large k&n's with 80mm intakes
Fuel-
Walbro 485's
ID2000's
running e85
Gear box
Albins 1-6
svm/gtc carbon wide clutch kit billet baskets
From what i understand, even though SVM say they build the engines, they dont.
but either they are holding some spec back, or the GTR is just such a beast that with a few bolt on mods you can crack a 1000HP!!
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Wilts
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
This will retake the record soon
Alpha Omega 7.98@186mph Dash Cam - YouTube
AMS Alpha Omega : 7.98sec World's Quickest Nissan GT-R by AMS PERFORMANCE - YouTube
Alpha Omega 7.98@186mph Dash Cam - YouTube
AMS Alpha Omega : 7.98sec World's Quickest Nissan GT-R by AMS PERFORMANCE - YouTube
another mighty fast GTR!
#10
Scooby Regular
Join Date: Oct 2004
Location: If you're not braking or accelerating you're wasting time.
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
Here's an expression I don't use very often 'F*ck my old boots!'.
Not just the vmax but the speed it gets there............
Not just the vmax but the speed it gets there............
#11
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Wilts
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
iirc at brunters you have about 1.25 miles of usable runway, and about 0.25 to stop in.
there is very little run off at that end, and i have seen the odd car there, err, not stop lol
there is very little run off at that end, and i have seen the odd car there, err, not stop lol
#12
Scooby Regular
Join Date: Oct 2004
Location: If you're not braking or accelerating you're wasting time.
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
#13
I was there that day to!! Got me thinking about a 2.3 Stroker!
Fast forward to 1.14 & 4.0min I take on a 800bhp R8 TWIN TURBO!
Fast forward to 1.14 & 4.0min I take on a 800bhp R8 TWIN TURBO!
Last edited by juggers; 18 July 2013 at 02:31 PM.
#16
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Wilts
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
Juggers, at vmax he 'only' managed 228. the 237 was the week after
Matty, someone has worked it out and if you had a mclaren F1 doing 100mph and the GTR at standstill, and they both 'started' at the same point - the GTR would still get to 200mph first!
Matty, someone has worked it out and if you had a mclaren F1 doing 100mph and the GTR at standstill, and they both 'started' at the same point - the GTR would still get to 200mph first!
#17
Agh right wondered why there were no motors there I assumed it was done after everyone went home.
#20
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Wilts
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
A gtr only needs about 630bhp to crack the double ton at brunters, so it just goes to show just how much extra power is needed for another 37mph!
Fpmsl!!
Thread
Thread Starter
Forum
Replies
Last Post
BlueBlobZA
Member's Gallery
30
25 July 2016 09:14 AM