Problems with my Defis???
#2
Scooby Regular
iTrader: (2)
Check connections to the controller.
There should be FOUR captive wires (NOT going in via any sort of plug).
Red is a permanent live.
Orange is a switched (ignition) live.
White is lighting live.
Black is earth.
My guess would be that you have somehow disconnected the earth wire. That will definitely make them sop working all at once.
There should be FOUR captive wires (NOT going in via any sort of plug).
Red is a permanent live.
Orange is a switched (ignition) live.
White is lighting live.
Black is earth.
My guess would be that you have somehow disconnected the earth wire. That will definitely make them sop working all at once.
#4
Scooby Regular
iTrader: (1)
Join Date: Aug 2011
Location: Oxfordshire
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
This all so happend to me couple of months back could not find them little clips any where everyone i did find was to big i ended up reuseing old clips sliding wires back in place very fidley job
Trending Topics
#9
#12
Right so with a bit of help I've been directed to the following website. What I require is an oil temp lead that goes to the defi controller and also the lead that goes into the meter output 2.
http://shop.edoperformance.co.uk/def...pr705kotrjfhp0
Which exact ones do I need??? I'm being abit special.
http://shop.edoperformance.co.uk/def...pr705kotrjfhp0
Which exact ones do I need??? I'm being abit special.
#13
Right so with a bit of help I've been directed to the following website. What I require is an oil temp lead that goes to the defi controller and also the lead that goes into the meter output 2.
http://shop.edoperformance.co.uk/def...pr705kotrjfhp0
Which exact ones do I need??? I'm being abit special.
http://shop.edoperformance.co.uk/def...pr705kotrjfhp0
Which exact ones do I need??? I'm being abit special.
#14
Scooby Regular
iTrader: (23)
1). Defi Oil Temp Sensor Wire [PDF00904H] @ £50.35
2).Defi Meter Wire 1M [PDF00615H] @ £16 or £20 for a 2m one.
Also a few in the states on the bay which work out around $30 each posted
http://www.ebay.com/sch/i.html?_odkw...+wire&_sacat=0
2).Defi Meter Wire 1M [PDF00615H] @ £16 or £20 for a 2m one.
Also a few in the states on the bay which work out around $30 each posted
http://www.ebay.com/sch/i.html?_odkw...+wire&_sacat=0
#18
Scooby Regular
iTrader: (2)
Join Date: Jul 2005
Location: Sometimes Bute, sometimes Renfrew
Posts: 812
Likes: 0
Received 0 Likes
on
0 Posts
Tein UK are deffi dealers, thats where I got my replacement sensors from
http://www.tein.co.uk/product/index.html
Graeme
http://www.tein.co.uk/product/index.html
Graeme
#19
Scooby Regular
iTrader: (20)
Join Date: Jul 2008
Location: n/a
Posts: 5,304
Likes: 0
Received 0 Likes
on
0 Posts
also this site, im trying to find out which one is the oil pressure cable that i need
http://www.knightracer.com/shop/inde...path=72_83_145
http://www.knightracer.com/shop/inde...path=72_83_145
#21
Scooby Regular
iTrader: (20)
Join Date: Jul 2008
Location: n/a
Posts: 5,304
Likes: 0
Received 0 Likes
on
0 Posts
just to update you guys, and for future reference, i got the wires fixed, after spending days on it and killing my finger tips and it still not working.
i had a friend but some eyes on it and discovered its a lose connection on the metre pins on the circuit board of controller. ive done a temp fix of wrapping cable round so it has pressure on it and cable tying it behind dash outta way, so it is working and my ecu trips can come back on.
but just for fault finding later if anyone has any issues, it could be the controller and not just the wires.
edit: just realised i posted this on wrong thread
i had a friend but some eyes on it and discovered its a lose connection on the metre pins on the circuit board of controller. ive done a temp fix of wrapping cable round so it has pressure on it and cable tying it behind dash outta way, so it is working and my ecu trips can come back on.
but just for fault finding later if anyone has any issues, it could be the controller and not just the wires.
edit: just realised i posted this on wrong thread
Last edited by eggy790; 07 May 2013 at 04:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post