Ok my car is at fb tuning to start on the work on my car, he has noticed the o/s rail -6 fitting will foul the intake pipe

Now he has a lot of work on so I'm wondering what have others done with the o/s rail fittings ?

The images I can seem to find have a rotated set up which don't help me

 

Mines no help then sure someone will post up shortly though.

Tim

 

Mine uses 90 degree fittings with no problem but my turbo is standard location. Post a picture, I'm sure the issue can be overcome.

 

I ain't got the car to take a picture but I'm hoping I can overcome

Ruch suggested a forged 90 bend but I'm also thinking either 120 or even a 180 but its pitting a downer on this car of mine

 

I had the same problem you need these search for M16 banjo fuel

 

I can't fit them as only reason I fitted the pipes is cause they are pretty and that one blatant on show so that will be a last resort

That sounds like the best idea but I'm worried about flow from that rail

 

I can't fit them as only reason I fitted the pipes is cause they are pretty and that one blatant on show so that will be a last resort

That sounds like the best idea but I'm worried about flow from that rail

 

Have a look on JJC Race & Rally or Torques website, there are loads of fittings available without using the banjo set up if you don't like it.

 

Search for eBay seller Torques, they have the best selection of unions in the UK.

 

This is the problem I had



So I bought these rails so I could have my fuel pipe wherever I wanted it.



Or you can do this which is what I'm doing until I get all my bits together

 

Cheers for the pics , I already got billet rails on mine

 

Just get one M16 banjo and 8mm fuel hose fitting

 

I'm going to get a m16 banjo and bolt and a an8 to an6 addaptot