scotts99scooby

I've just purchased my 4th scooby in 3 months and this one has had aot of work done to it but cant get it rolloing roaded till funds are built up again so if any clever know alot scooby pro's read this can u give a rough idea what it could be running.....mods are:

1994 (L)import subaru impreza jrd,gc8 chassis so possibly sti (ive been told)

chipped
hks mushroom induction kit
front mount intercooler
470cc injectors
whalbro 255 fuel pump
reversed inlet manifold
td05 turbo
stainless hks unequal headers
47mm up pipe with 38mm external wastegate n screamer pipe
full s/s exhaust straight through, scott and hayward bk box
uprated cosworth gaskets
manual boost control running 0.6 bar.

daz1968

iTrader: (13)

Not a lot at 0.6 bar that's a very low boost figure, could get a lot more if mapped for more boost

Pramas

td 05 is capable of around 380-400 bhp however i think ur injectors max out at around 340? and u for sure wont be anywhere near that only running 0.6 bar, 1.4 is more the norm

scotts99scooby

Sorry was meant to say 1.6 bar bloody blackberrys and there butons!My last import scooby was rolling roaded at 320 bhp only running 1 bar, had less work done than this 1 aswell, recently got rid of a uk my99 running 280 bhp running 14psi and current 1 is a hell of a lot more quicker than that 1!

scotts99scooby

Sorry mis placement of button! Bloody blackberrys after a nokia lol its running at 1.6 bar ish!!seems to kinda waver between 1.4-1.6.

midnight

iTrader: (10)

Td05 18/20g may make that but std 16g closer to 340 with some good supporting mods

Stevesbluewrx

iTrader: (4)

How the how you manage to be on your fourth?

Steve

MattyB1983

iTrader: (51)

It's difficult to give you an idea of power without knowing which turbo your using.
As above, 16G will be alot less than say a 20G.

Best bet is to get it to a set of rollers. Will only cost you circa £50.