pimmo2000

iTrader: (6)

I've got a classic running just over 300bhp and I was wondering if a front mount would be worth the effort ?

Will I see any gains ? will I need to get it mapped again and what's the cost associated with buying and fitting ?

scoobyboy1

iTrader: (16)

Personally I wouldnt have one unless I was running close to 400bhp(personal choice). You wont see that much gain in power, but you will notice a slightly more lag(from what I have noticed over a TMIC) and I would advise to get it mapped once fitted like any modifications that you put on your car to get the most from it!!!

alcazar

iTrader: (2)

I would agree with not doint it for 300bhp, but over 350, then I'd think about it, yes.

As for the extra lag, I've not noticed it, it's probably lost to me somewhere in amongst all the extra horses and lbs ft.

chocolate_o_brian

iTrader: (22)

I agree with Jeff on this. Comparing my old standardish UK turbo with his 2.5 UK turbo, there isn't much difference in lag at all. The kick is more progressive but the shear low down torque of the 2.5 over the 2.0 irradicates this lag myth. As said, closer to 350-400 ponies and it's more necessary

scoobygaz1

iTrader: (3)

As above 350 plus yes

pimmo2000

iTrader: (6)

Cool, cheers boys

BLU

iTrader: (27)

I have one, but its mainly for show as my car will soon be scoopless
If you want it for performance gains then prob not worth the effort....... until your looking at wanting 350bhp+

The lag myth is bollox. Noticed no difference on mine from when it had the tmic!

scoobyboy1

iTrader: (16)

So all that extra pipework for a FMIC doesnt make a difference??? So how come people do reversed Inlets and shorten intercooler Piping????

On a STi with a standard turbo(eg VF23, VF24 etc) and you add a FMIC, you saying there is no extra lag from a STi with the same turbo and TMIC.

I noticed a difference from My STi 6 with VF35 and STi TMIC, and my brothers STi 4 with VF35 and FMIC with the same mods, My STi 6 would boost slightly quicker!!!

alcazar

iTrader: (2)

I think it also depends on headers/up-pipe/turbo combination for early spool and a decent mapper.

Mine were chosen by the great Harvey Smith and the mapping done by the equally great Bob Rawle.

I just do not notice any lag. Sorry.