initialD

iTrader: (2)

hi all, just got a set of plasma dials for my bug eye , so decided to spend some time this afternoon taking my old dials out and investigating the wiring . the dials themselves are a piece o'cake to fit, but with the kit you have a small transformer with a positive and a negative " rediculously short by the way " it sais u simply connect the positive to the 12v that works the lights and neg to earth or negative wire . do u think this is best left to the pros ? cos the amount of wires behind the clocks is crazy !! also why are the wires always sooo bloody short ?

jura11

iTrader: (7)

Try contact here JonMC https://www.scoobynet.com/member.php?u=53065
he have fitted on Bugeye as well Plasma dials.


Jura

chrisdicko

iTrader: (21)

Got any pics of what they look like?

jura11

iTrader: (7)

Here are JonMC plasma dials






Jura

Jimbob

iTrader: (13)

Solder them onto a bulb holder, I had Plazmas on my old car and they wired on that way.
You don`t need the bulb in there, as you have the plazma sheeting.

If you plug the holder in and it doesn`t work, then remove the holder twist 180 degrees and put back in. As they are the same as LED`s in that they need the correct polarity.

This will be more than enough for the Plazmas, I would show you pics of mine but my photobucket isn`t working today.

initialD

iTrader: (2)

good point about the bulb holder , didnt think of that ! and cheers for the advice jura they are the same as mine

Beastra

iTrader: (20)

I fitted a set of these to my classic a couple of weeks ago.

Extended the Positive wire to the cig lighter bulb loom and used a ring tag crimp on the earth wire and connected it to the metal frame of the dash.

jaygsi

iTrader: (46)

Migh get a set for my classic