clutch recomendation 4 450 bhp p1?
16 May 2011, 10:45 AM
#7
Depends on torque not BHP.
My P1 runs circa 450bhp/380ftlb and it's been fine on a 5 speed AP Racing Organic for thousands of miles/several years. I don't do drag strips etc, but it does get driven hard.
Probably near limit at 380ft lb so if you're running something torquier or are a Santa Pod type then probably best to go ACT single plate or one of the double plate clutches ( but be prepared for rattling in the latter case).
My P1 runs circa 450bhp/380ftlb and it's been fine on a 5 speed AP Racing Organic for thousands of miles/several years. I don't do drag strips etc, but it does get driven hard.
Probably near limit at 380ft lb so if you're running something torquier or are a Santa Pod type then probably best to go ACT single plate or one of the double plate clutches ( but be prepared for rattling in the latter case).
Trending Topics
16 May 2011, 02:13 PM
#11
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
AP racing at that level. Everytime! Give David at APi a bell!
OEM like to use: no point in faffing around with twin plate clutches which are noiser and harder to drive than std arrangements until you need to!
OEM like to use: no point in faffing around with twin plate clutches which are noiser and harder to drive than std arrangements until you need to!
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM
