"tein" bonnet dampers fitted today in the freezing cold
#1
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
"tein" bonnet dampers fitted today in the freezing cold
Had a good day today was -4 been looking forward to fitting these since monday but been away till late last nite ,so had a clear bright very cold day and set too.
Was a bit of a struggle at the start as i couldn't depress the damper to fit it in (must of had a blonde moment) then realised all i had to do was lift the bonnet higher to fit...doh
The fixing kit that came withit only allows you to fasten to 1 bolt on the bonnet itself so had to drill and tap an extra hole for 2nd bolt to stop it from slipping round when i shut the bonnet,i have a picture of a car that has these fitted and the bracket on the bonnet is different to mine think i need to find these as seem a better fit.
Let me know what you think !
Last edited by leecalcars; 03 December 2010 at 03:41 PM. Reason: wrong size pic
Trending Topics
#11
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
No, the brackets supplied have a multi fit hole's,but only line up with 1 of them, so to secure better i drilled and tapped a 6mm hole and added an extra bolt.
The other pic i added show a bracket that picks up both of the existing bolts that secure the bonnet to the hinge so giving top and bottom supports.
The other pic i added show a bracket that picks up both of the existing bolts that secure the bonnet to the hinge so giving top and bottom supports.
#14
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
well, i bought from a member on here and these where the only brackets supplied with the kit ,i'm pressuming there may have been another set not supplied now i see yours
#16
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
http://www.tein.com/products/hood_damper.html
I paid a little under £90 delivered but a bit more direct from the above site
I paid a little under £90 delivered but a bit more direct from the above site
#22
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
just read through instruction leaflet and on the contents list and it does show the correct brackets think they have not been sent as described il email the seller and find out where they are.
#24
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
Thers's only the bonnet prop which gets in the way when working on the car is one reason ,cosmetically the second reason and thirdly because i like them.
#26
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
I think you've been sent a kit for a different car.
Alcazar; Jeff, what turbo are you running on your 2.5? Just out of interest, being curious n'all.
I've lashed some 2.5l equipped cars, it's fun embarrassing them.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM