Plaese help! wont start
26 November 2010, 08:46 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2010
Location: Northants
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Plaese help! wont start
Just put my engine back in my car and cant get it to start ive checked everything all wiring and stuff and dont know why it wont start. When you turn the ignition on so the dash lights come on does the engine check light normaly come on until its started then goes out cause mine dosent come on at all, just that i was told it should do to tell you the ecu is working. I've checked and the car has no spark at the plugs. Its a 1998 uk turbo with links ecu running 350bhp its been sat for about two months while the engine was getting rebuild, just annoying cant figure out what it could be any advice would be great 
26 November 2010, 10:18 PM
#7
Scooby Regular
iTrader: (1)
Join Date: Dec 2009
Location: Ayrshire
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
Have you plugged the coil pack in. Did you put the cam wheels back on correctly in the correct place as one is used to pick up the cam sensor.
Last edited by f4la k; 26 November 2010 at 10:20 PM.
Trending Topics
26 November 2010, 10:20 PM
#8
Scooby Regular
Thread Starter
Join Date: Aug 2010
Location: Northants
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Yes mate thats plugged in 
Yes pretty sure they are mate a mechanic friend built it and hes knows what hes doing, but this wouldnt stop the check engine light from coming on the dash when i turn the keys before start up would it?
Yes pretty sure they are mate a mechanic friend built it and hes knows what hes doing, but this wouldnt stop the check engine light from coming on the dash when i turn the keys before start up would it?
Last edited by LEO-TERZO; 26 November 2010 at 10:45 PM.
Thread
Thread Starter
Forum
Replies
Last Post
toyney83
General Technical
10
02 October 2015 08:38 PM
