louder now decat fitted
#1
Scooby Regular
Thread Starter
iTrader: (37)
Join Date: Jan 2005
Location: never far away from my impreza
Posts: 7,843
Likes: 0
Received 0 Likes
on
0 Posts
louder now decat fitted
Noticed since havind full decat fitted japspeed downpipe ,and custom straight through to backbox that its very loud inside the car now ,bit too loud infact is this so with decat downpipe any remedies to quiten it abit or change system thoughts please.
cheers lee
cheers lee
#2
Scooby Regular
iTrader: (60)
Join Date: Apr 2010
Location: West Mids
Posts: 2,567
Likes: 0
Received 0 Likes
on
0 Posts
because you have a custom straight thru pipe as a centre section it will be louder in the cabin as you have got rid of the resonator which quietens the sound down a bit in the cabin, a way around this is to buy a resonated centre section.
#6
Scooby Regular
iTrader: (10)
If your car is a classic the the Simple solution if your system from the downpipe back is not a 1 piece unit , simply remove the centre straight through section and fit a std centre section off a uk classic which has a small cat & a resonator section. Not sure about newage centre sections I think they just have the cat.
#7
Scooby Regular
iTrader: (10)
Join Date: Mar 2009
Location: Slovenia
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem just when I bought new decat system on my newage. Tried to fit back center pipe with resonator, drone in cabin was slightly decreased but still not what I wanted.
Then some friend made this thing for me, it is like a nozzle with additional holes drilled around. Welded to its own flange and putted between center pipe and back box.
It's a lot lot better now + performace stayed the same.
Just an idea which works...
Then some friend made this thing for me, it is like a nozzle with additional holes drilled around. Welded to its own flange and putted between center pipe and back box.
It's a lot lot better now + performace stayed the same.
Just an idea which works...
Last edited by Unikat; 01 November 2010 at 11:02 AM.
Trending Topics
#9
Scooby Regular
iTrader: (2)
Join Date: Jul 2010
Location: Reading
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem just when I bought new decat system on my newage. Tried to fit back center pipe with resonator, drone in cabin was slightly decreased but still not what I wanted.
Then some friend made this thing for me, it is like a nozzle with additional holes drilled around. Welded to its own flange and putted between center pipe and back box.
It's a lot lot better now + performace stayed the same.
Just an idea which works...
Then some friend made this thing for me, it is like a nozzle with additional holes drilled around. Welded to its own flange and putted between center pipe and back box.
It's a lot lot better now + performace stayed the same.
Just an idea which works...
#10
Scooby Regular
iTrader: (10)
Join Date: Mar 2009
Location: Slovenia
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I bought this reduction piece aka nozzle and then gave it to toolmaker to finish it for properly fitting into 2.5" pipe, drilled the holes and welded it on its own flange. Great thing I must say.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM