What Brakes should i get????
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Oct 2009
Location: crosshands
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
What Brakes should i get????
i have a wrx bugeye and just found out i need new front discs and pads they are the standard discs and pads, so im looking for advice of what to do next ie standard discs and pads again, or grooved discs and uprated pads, suggestions???
thanks
thanks
#2
Scooby Regular
Join Date: Dec 2002
Location: Sunny BELFAST
Posts: 19,408
Likes: 0
Received 0 Likes
on
0 Posts
#4
THE braking specialist
iTrader: (259)
Did Somebody shout ?
HI
If you have found the standard parts to work for you , there is no need to go mad with replacements , the most popular set up we offer is our grooved discs and kevlar pads , the pads are the first step up from standard so work perfect from cold , and are quiet , but will take more heat when you want to press on.
I can supply you these for £99 a set , add £10 if you want the centres sprayed black to stop them going rusty , and P&P of £12.50.
I always have these in stock for a next day delivery
Hope this helps
Cheers Ian
www.godspeedbrakes.co.uk
HI
If you have found the standard parts to work for you , there is no need to go mad with replacements , the most popular set up we offer is our grooved discs and kevlar pads , the pads are the first step up from standard so work perfect from cold , and are quiet , but will take more heat when you want to press on.
I can supply you these for £99 a set , add £10 if you want the centres sprayed black to stop them going rusty , and P&P of £12.50.
I always have these in stock for a next day delivery
Hope this helps
Cheers Ian
www.godspeedbrakes.co.uk
Last edited by Godspeed Brakes; 22 September 2010 at 01:58 PM.
#5
Former Sponsor
iTrader: (234)
Cheers Tom
If you're current setup works for you, just replace it like for like.
We can offer you a complete OEM spec setup for not much money or our uprated setup like Tom has fitted also.
Just give us a call on 01462 488244.
If you're current setup works for you, just replace it like for like.
We can offer you a complete OEM spec setup for not much money or our uprated setup like Tom has fitted also.
Just give us a call on 01462 488244.
Last edited by Aztec Performance Ltd; 22 September 2010 at 02:06 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM