Help with my 98 GC8 import!
#1
Help with my 98 GC8 import!
I have a 1998 impeza wrx jap import and I need to replace calipers discs and pads. Lookin for advice on how to remove calipers, discs and pads for that model no. It's an GC8 ej20. Any advice or web site referrrels would be appreciated as I would like to do this myself. Thanks.
#2
Scooby Regular
iTrader: (6)
https://www.scoobynet.com/technical-...sc-4-pots.html
try that, they are 4 pots, but same principles
try that, they are 4 pots, but same principles
#4
Scooby Regular
iTrader: (2)
dead easy chap.
Take the wheels off. 2 bolts behind the caliper holding that on. pull the caliper off then u can pull the disk off. undo the wire clip, pull out the spring and slide out the 2 metal guids and thats pads out too.
Undo brake pipe from caliper and its free to move.
I believe ian godspeed provides refurbed calipers.
Take the wheels off. 2 bolts behind the caliper holding that on. pull the caliper off then u can pull the disk off. undo the wire clip, pull out the spring and slide out the 2 metal guids and thats pads out too.
Undo brake pipe from caliper and its free to move.
I believe ian godspeed provides refurbed calipers.
#6
Scooby Regular
iTrader: (3)
Join Date: Mar 2008
Location: Stuttgart & Dresden
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
hi there,
you have to seesaw a screwdriver in the caliper
Otherwise I've got reconditioned 2-pot calipers with new 277mm discs and black viper pads. They'll stop u well -> please msg me, better make an offer, thx
cheers
Nico
you have to seesaw a screwdriver in the caliper
Otherwise I've got reconditioned 2-pot calipers with new 277mm discs and black viper pads. They'll stop u well -> please msg me, better make an offer, thx
cheers
Nico
Thread
Thread Starter
Forum
Replies
Last Post