Mapping advice/reccomendations
05 March 2010, 05:37 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2007
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Mapping advice/reccomendations
lo there
basically just need some recomendations on where to take my impreza to get it mapped
where have people used, cost etc
i am on east coast nr Hull so local would be best but dont mind travelling.
cheers in advance
andy
basically just need some recomendations on where to take my impreza to get it mapped
where have people used, cost etc
i am on east coast nr Hull so local would be best but dont mind travelling.
cheers in advance
andy
05 March 2010, 06:51 PM
#5
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Agree with Simon being THE man....
LOL
But another (Northern) option is Andrew Carr, he's done three or four cars for friends and he does OS mapping which works out cheaper than Ecutek.
Depends what year yours is, and what mods done.
IMHO
dunx
LOL
But another (Northern) option is Andrew Carr, he's done three or four cars for friends and he does OS mapping which works out cheaper than Ecutek.
Depends what year yours is, and what mods done.
IMHO
dunx
05 March 2010, 07:12 PM
#6
Scooby Regular
Thread Starter
Join Date: Oct 2007
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
its a 95 wagon 2000turbo
closed deck 2.0 block
forge pistons
nitrided crank
hks valves and springs
sti inlet manifold
ported and polished heads
std injectors to be uprated to 505cc once run in possibly bigger if needed
tod5 to be changed when run in to whatever is capable of 500 and priced wisely (just waiting for some prices back from rick @ endless my mate in japan (its not what you know but who lol)
front mount
filter
hks exhaust manifold
hks superdragger ehaust
3" uppipe
3" downpipe
oil cooler
so a decent spec
been reading about alan and martyn @ enginetuner and they seem to know what heyre doing producing 627bhp. would be cool to speak to them if anyone knows how to contact em
andy
closed deck 2.0 block
forge pistons
nitrided crank
hks valves and springs
sti inlet manifold
ported and polished heads
std injectors to be uprated to 505cc once run in possibly bigger if needed
tod5 to be changed when run in to whatever is capable of 500 and priced wisely (just waiting for some prices back from rick @ endless my mate in japan (its not what you know but who lol)
front mount
filter
hks exhaust manifold
hks superdragger ehaust
3" uppipe
3" downpipe
oil cooler
so a decent spec
been reading about alan and martyn @ enginetuner and they seem to know what heyre doing producing 627bhp. would be cool to speak to them if anyone knows how to contact em
andy
05 March 2010, 11:35 PM
#7
Scooby Regular
iTrader: (1)
Join Date: Dec 2001
Location: You only live ONCE But if you do it right >>>>> ONCE is enough
Posts: 7,327
Likes: 0
Received 0 Likes
on
0 Posts
Unit 1 Valley Road, Plympton, Plymouth, Devon, PL7 1RF
Telephone: 01752-345880
Facsimile: 01752-346080
e-mail: enquiries@enginetuner.co.uk
Alan Jeffery - Engine Tuner high performance engine tuning and engine building
Trending Topics
06 March 2010, 10:15 AM
#10
Scooby Regular
Join Date: Nov 2004
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Paul at Zen Performance is the man. I made a 6 hour round trip to get him to map my car and he completely transformed it.
My car had previously been mapped by another well respected mapper and the difference is night and day.
I also seriously considered Jolly Green Monster as he seems to get loads of great feedback from happy customers.
My car had previously been mapped by another well respected mapper and the difference is night and day.
I also seriously considered Jolly Green Monster as he seems to get loads of great feedback from happy customers.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM