i need more power
#4
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
decat, panel filter, remap should see 340bhp.. the standard turbo will push more but getting close to limits at that point.. headers can add a little extra..
ideally for a proper 360bhp you would need a TD05 18g turbo on top of the decat and panel and remap, altohugh occasionally the odd vf34/35 will push to 360.
Standard tmic is fine to these power levels and no need to go fmic
Simon
ideally for a proper 360bhp you would need a TD05 18g turbo on top of the decat and panel and remap, altohugh occasionally the odd vf34/35 will push to 360.
Standard tmic is fine to these power levels and no need to go fmic
Simon
#5
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: London
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
decat, panel filter, remap should see 340bhp.. the standard turbo will push more but getting close to limits at that point.. headers can add a little extra..
ideally for a proper 360bhp you would need a TD05 18g turbo on top of the decat and panel and remap, altohugh occasionally the odd vf34/35 will push to 360.
Standard tmic is fine to these power levels and no need to go fmic
Simon
ideally for a proper 360bhp you would need a TD05 18g turbo on top of the decat and panel and remap, altohugh occasionally the odd vf34/35 will push to 360.
Standard tmic is fine to these power levels and no need to go fmic
Simon
#6
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
I can add sound effects to an ecutek remap though.
Pricing in newage section www.jollygreenmonster.co.uk
Simon
Trending Topics
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Replied in your other thread.
It is easy to give the pops and bangs from the exhaust on overrun but gain nothing other than the noise on remapping the original ecu.
Unlike after market ecu like simtek or solaris where there will be a small gain but still retain servo assist on the brakes etc
Simon
It is easy to give the pops and bangs from the exhaust on overrun but gain nothing other than the noise on remapping the original ecu.
Unlike after market ecu like simtek or solaris where there will be a small gain but still retain servo assist on the brakes etc
Simon
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM