boulevard

iTrader: (1)

I have Prodrive springs on my Hawkeye STI. Are there any issues fitting mudflaps from Scoobyworld for example with them dragging?

Cheers

Steve

JonnyUK1980

iTrader: (1)

mine sit very low to the ground but never really drag, only when going over speed bumps etc just never try to reverse up a high kerb else you may squash them and rip them off lol

Scoobyworld flaps fitted to my lowered blob wrx...









Now hurry up and get them on, should take you a couple of hours

wiley

iTrader: (63)

my one is about a 1 mm off the floor, need to get them trimmed as they are always dragging

wiley

boulevard

iTrader: (1)

Cheers. I will get some ordered, just need to decide if I go for Scoobyworld or some from Performance Creations off Ebay.

M444GY

iTrader: (72)

mine dragged for a bit then they wore down and are ok now lol

StanS

iTrader: (3)

Mine kept catching on speed bumps/ramps. Just sawed 1.5" off the bottom - no probs !

wayner845

iTrader: (2)

Watch when your reversing as i ripped my rear bumper off as they were well attached,beware.

cossie-nutter

iTrader: (45)

I let my fronts drag as they will only wear down abit! lol or get a Stanley knife and cut them alittle!

IainMilford

iTrader: (15)

mine is lowered on teins, running on 18"'s, I've got scoobyworld flaps fitted, only drag when going over the odd speed bump or getting off my drive!! I always go slow so not a problem