Bugger i think my scoobs running lean :(
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Wirral,Pensby
Posts: 2,010
Likes: 0
Received 0 Likes
on
0 Posts
Bugger i think my scoobs running lean :(
My 96 WRX hasn't been running right for a few days now nothing major really just not sounding right and not behaving properley.
I noticed on the way home from work (mway) that my AFR gauge was just reading the 4 odd red lights on Lean and not going up to rich when boosting as normal now it still pops and gives the odd bang when i lift off just like it always has so surely it's still running a bit rich??
If it is running lean i take it would be a bad idea to keep driving her?? What could be the problem?
I'd have put this in technical but it's a bit of an immediate problem
Forgot to add it's decatted and running an FMIC but i've always used booster..mind ypou i ran out of the 10 bottles i had of Millers last fill up and used the STP i used to use before that instead..that be it?
I noticed on the way home from work (mway) that my AFR gauge was just reading the 4 odd red lights on Lean and not going up to rich when boosting as normal now it still pops and gives the odd bang when i lift off just like it always has so surely it's still running a bit rich??
If it is running lean i take it would be a bad idea to keep driving her?? What could be the problem?
I'd have put this in technical but it's a bit of an immediate problem
Forgot to add it's decatted and running an FMIC but i've always used booster..mind ypou i ran out of the 10 bottles i had of Millers last fill up and used the STP i used to use before that instead..that be it?
#4
Scooby Regular
Join Date: May 2008
Location: Most Banned Shire
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
MAF?
Have you an aftermarket Induction System on?
Dis-connect the MAF Connector and see if it makes a difference (it should run worse!) ..... if it makes no difference then I would suspect that.
Have you an aftermarket Induction System on?
Dis-connect the MAF Connector and see if it makes a difference (it should run worse!) ..... if it makes no difference then I would suspect that.
#5
Scooby Regular
Join Date: Jan 2008
Location: A petrol station near you!
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Where did you get your last batch of petrol from?
I sometimes get this when I use Tescos99
Mine runs fine when I use Vpower but ran like a dog when I used T99
Obviously mapped for VP
I sometimes get this when I use Tescos99
Mine runs fine when I use Vpower but ran like a dog when I used T99
Obviously mapped for VP
#6
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Wirral,Pensby
Posts: 2,010
Likes: 0
Received 0 Likes
on
0 Posts
I've always used V power mate and it's always ran fine i've got a feeling it must be the fact it was used to the millers and i've put the STP in and it's thrown a wobbler but how do i sort it??
I've just filled it up with BP Ultimate as it's only over the road from our new house to see if that does any good.
I've just filled it up with BP Ultimate as it's only over the road from our new house to see if that does any good.
Trending Topics
#9
Scooby Regular
iTrader: (2)
Join Date: Jan 2004
Location: Hertfordshire
Posts: 4,312
Likes: 0
Received 0 Likes
on
0 Posts
I had this on a walbro. knocklink in my case going crazy. Had it checked by my mapper and not enough fuel pressure on high load
#11
Scooby Regular
Mine was found to be running lean when JGM came to do a remap, he said it was the fuel pump. They can still pump fuel but not so good when on boost
#13
Mine did the same. But being a UK spec I mostly run it on cheap (thats a laugh) pump fuel and just use V power every now and again.
Still ran fine.
Same fuel economy.
But wouldn't even get to Stoich on my FR gauge.
Scared the **** out of me!
Lambda sensor Fubared.
Still ran fine.
Same fuel economy.
But wouldn't even get to Stoich on my FR gauge.
Scared the **** out of me!
Lambda sensor Fubared.
#14
Scooby Newbie
Join Date: May 2008
Location: Banned Forever
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
I mentioned the MAF may be the issue in Post 4 ... but pathetically I am having my posts put on auto ignore
Disconnect the MAF and see if it runs differently (it should) ..... if it doesnt - suspect that.
Disconnect the MAF and see if it runs differently (it should) ..... if it doesnt - suspect that.
#19
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2005
Location: Wirral,Pensby
Posts: 2,010
Likes: 0
Received 0 Likes
on
0 Posts
Righty ho then...i've ordered a Walbro pump and a case of Millers booster so i'll get that fitted and also a new Lambda just for good measure
Getting married in the morning so it's sitting on the drive for 2 weeks whilst were away and i'll sort it when we get back.
Getting married in the morning so it's sitting on the drive for 2 weeks whilst were away and i'll sort it when we get back.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM