Tissy

Does anyone know of a good Alloy fabricator to replicate a radiator from an original Ford RS200.

The original one has sprung a couple of leaks, so a new duplicate is needed.

Any pointers appriciated.

Phil.A

The best place to go will be Proalloy lookup there website

Phil

v8voodoo

Don't Serck have a motorsport division IIRC..?

smartuki

i could welld the one you have if you like

Tissy

Thanks for the offer, but its not mine, its a mates car.

Plus there is quite a few holes apparently, so once on is plugged, another will appear. Thats why he is looking for a new one.

Thanks again for the offer though.

smartuki

i may have a nice new one ( std ) as i swaped my one for a larger one , i will have a look for ya
wots he got 1.8 2.0 or 2.4 ?

Tissy

You say you may have one ?

You know its for one of these



And not an RS2000

smartuki

eeermm yeah thats a rs200, is it a 1.8 2.0 or 2.4 ???
i have had 2 rs200 from ford
2 rs500 texaco turing cars
and the 1st escort cosworth to win a rally for ford

im not a chimp mate i do know what im on about

Tissy

I wasn't suggesting you were a "chimp", but i was slightly confused because as far as i was aware the RS200 only came as a 1.8 apart from the limited edition 2.1 Evolution. So not sure what you meant by the 2.0 and 2.4.

Just didn't want you to think that I meant an RS2000.

Of course i am interested in what you have as the RS200 which needs the radiator replacing is a 1.8.

smartuki

there are all 3 not to many of the 2.4 think there were 5 or 6
all the first run were 1.8 in road trim , and loads o the 2.0 (2.1)
i will go look in the morn mate
i wasnt being funny but you do get "chimp" Q&A's but i was just letting you know that i know what im on about
i will let you know 2moro

Tissy

Cool, thanks very much.

I'll wait to hear from you tomorrow.

Steve Gibbins

iTrader: (1)

Yes they do, the branch at Hayes in Middlesex is the motorsport branch, give them a ring, they should be able to help.

Steve (Serck Intertruck Northampton branch!)

frayz

iTrader: (7)

I know a race car fabricator based in Essex mate, also an RS200 specialist.

Let me know if you get stuck.

Tissy

Could you post or PM me the details please mate.

Thanks for sorting out the other issue, i'm guessing it was you

Many thanks.

ZEN Performance

Your best bet is to get it sent away for replication with a proper rad place. I can recommend Docking at silverstone, and AH fabrications, I guess others can do a good job, but I know these two will.

frayz

iTrader: (7)

PM sent mate.

Get in touch with him..