Help, Calling all blob eye owners?
#6
Scooby Regular
Join Date: Jul 2001
Location: Darlington
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
In the same boat, will eventually get round to it.
How to clear MY04 headlights - photo instructions - Interior & Exterior Modification & Care - NASIOC
How to clear MY04 headlights - photo instructions - Interior & Exterior Modification & Care - NASIOC
#7
Scooby Regular
Join Date: Oct 2003
Location: NW Houston, TX
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Just done mine chuck... heres all the info... (posted on sheffieldscoobys.co.uk
Basically followed all the guides and added a couple of steps
Bits required...
Oven
Plastikote Black (Satin/Gloss/Matt??) Silcone Sealant (Clear)
Yellow and Silver paint for bulbs.. Plastikote Enamel
Remember bolts behind grill and to mask up the wings to stop scratches.
Guides
How to clear MY04 headlights - photo instructions - Interior & Exterior Modification & Care - NASIOC
Subaru Impreza Drivers Club Forums - I've been de-tangoed
https://www.scoobynet.com/scoobynet-...t=detango+blob
https://www.scoobynet.com/members-ga...+headlight+mod
https://www.scoobynet.com/projects-4...LED+indicators
I would recommend 60 degrees celsius in a fan oven for 10 mins
PP/ABS may start to get a bit soft any higher, and it is just the mastic you want to soften...
When sticking the bits back together..I heated up the old mastic with a heatgun, then siliconed and pushed together...and a bit more silicone..
Also, be sure to try an pull the light apart square...I broke a tab on the chrome insert when pulling apart..
Basically followed all the guides and added a couple of steps
Bits required...
Oven
Plastikote Black (Satin/Gloss/Matt??) Silcone Sealant (Clear)
Yellow and Silver paint for bulbs.. Plastikote Enamel
Remember bolts behind grill and to mask up the wings to stop scratches.
Guides
How to clear MY04 headlights - photo instructions - Interior & Exterior Modification & Care - NASIOC
Subaru Impreza Drivers Club Forums - I've been de-tangoed
https://www.scoobynet.com/scoobynet-...t=detango+blob
https://www.scoobynet.com/members-ga...+headlight+mod
https://www.scoobynet.com/projects-4...LED+indicators
I would recommend 60 degrees celsius in a fan oven for 10 mins
PP/ABS may start to get a bit soft any higher, and it is just the mastic you want to soften...
When sticking the bits back together..I heated up the old mastic with a heatgun, then siliconed and pushed together...and a bit more silicone..
Also, be sure to try an pull the light apart square...I broke a tab on the chrome insert when pulling apart..
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jonny mac
ScoobyNet General
10
09 October 2015 12:25 PM