bob r

iTrader: (46)

I am in the process of fitting a prodrive fuel pump to my newage sti.

I have installed the new pump and fitted the whole assembly back into the tank no probs.

I have then refitted the 2 rubber fuel hoses, but the 3rd one has a plastic L shaped connector which is causing me problems.

As i took it off (L shaped connector) 4 plastic/rubber washers came off the pipe assembly. When refitting i am putting them back-green then clear onto the pipe with the blue and black inside the pipe. This appears to be correct but i cannot push it onto the brown connector. I am stumped.

Any advice please. (yes i know its the wrong section but im starting to flap)

GazTheHat

I'm sure there's a fitting guide floating around, i remember seeing one when i (*garage) was doing that.

I just took mine to the garage, for £40 it's not worth the hastle.

Sorry, just read my post and it's no help and i'm probably making things worse...

bob r

iTrader: (46)

I was quoted 2hrs @ 50.00 per hrs + vat so i thought id give it a go.

Waits with eagerness.

bob r

iTrader: (46)

Piece of cake.