It's gone BANG !!!
21 July 2006, 11:01 AM
#1
Scooby Newbie
Thread Starter
Join Date: Mar 2006
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
It's gone BANG !!!
Fooked ! thats the only way to describe it !!! last nite my sti v3 developed a knock - sounds like sum1's hittin my sump with a hammer! 
has any1 got any advice where to pick up engines/short blocks etc
Also seen this on ebay: http://cgi.ebay.co.uk/STi-2-5-Short-...QQcmdZViewItem
Would this bolt up to my heads etc?R they just a straight forward swap? Any advice would be appreciated.
Cheers
Paul
has any1 got any advice where to pick up engines/short blocks etcAlso seen this on ebay: http://cgi.ebay.co.uk/STi-2-5-Short-...QQcmdZViewItem
Would this bolt up to my heads etc?R they just a straight forward swap? Any advice would be appreciated.
Cheers
Paul
21 July 2006, 11:19 AM
#2
Scooby Regular
Join Date: Dec 2005
Location: bath/plymouth
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
Yeah all the parts off your engine would bolt straight onto that engine. I was going to go down that route but the only thing i didn't like about the engine you've found there is it has cast pistons in it. If i was upgrading engines i would want full forged internals.
Trending Topics
21 July 2006, 11:37 AM
#8
Originally Posted by The Chief
he probably drives a Saxo - or worse a Nova
That is soooo last year
21 July 2006, 11:44 AM
#13
Scooby Regular
Join Date: Oct 2004
Location: There is only one God - Elvis!
Posts: 8,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EddScott
Another troll wasting everybodies time 
Totally agree - i dont know why i let these geeky bell-ends get to me!!!
anyway back on topic - the price for a shortblock seems good but from flat4online they look as if they are STI and which hopefully come with forged pistons and crank.
mine went pop a while back and i had a STI short block fitted. for a little bit extra it might seem worth getting an STI block.
i'm sure some of the experts will give a more thorough answer later
21 July 2006, 11:55 AM
#14
Scooby Regular
Join Date: Aug 2003
Location: Sheffield; Rome of the North
Posts: 17,582
Likes: 0
Received 0 Likes
on
0 Posts
It bothers you because you know that its some spineless no-mark who darent post under his own name.
Shaun needs to buck his ideas up before ScoobyNet goes down the ****ter.
Shaun needs to buck his ideas up before ScoobyNet goes down the ****ter.
21 July 2006, 12:00 PM
#15
Scooby Newbie
Thread Starter
Join Date: Mar 2006
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Just had a look on flat 4 online - does anybody know whats involved in modifying the water pipe? Did you just put a standard sti block back in and where did u get it from?
Cheers
Cheers
21 July 2006, 12:04 PM
#16
Scooby Regular
Join Date: Oct 2004
Location: There is only one God - Elvis!
Posts: 8,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GC8
It bothers you because you know that its some spineless no-mark who darent post under his own name.
Shaun needs to buck his ideas up before ScoobyNet goes down the ****ter.
Shaun needs to buck his ideas up before ScoobyNet goes down the ****ter.
I must admit its a bit sad when new member comes on here asking for a bit of helpful advice, and gets attacked or ripped into - i have had loads of useful info on her that has helped me and Scoobynet has been a valuable re-source over the last year or so. its getting a regular occurence now when members ask questions and get sh*t thrown at them
I wouldnt go as far as you to say its Shauns fault, but i would imagine he must tear his hair out sometimes and be fed up with it all.
Best just to ignore these people - especially me
21 July 2006, 12:06 PM
#17
Scooby Regular
Join Date: Oct 2004
Location: There is only one God - Elvis!
Posts: 8,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by paulbstiv3
Just had a look on flat 4 online - does anybody know whats involved in modifying the water pipe? Did you just put a standard sti block back in and where did u get it from?
Cheers
Cheers
i'd say ring Flat4 - i've heard good things about them - sorry i cant help you more but technically i'm a f**kwit i can only go off what i've experienced.
Another helpful guy is david at API.
21 July 2006, 12:30 PM
#18
Scooby Regular
Join Date: Aug 2003
Location: Sheffield; Rome of the North
Posts: 17,582
Likes: 0
Received 0 Likes
on
0 Posts
It sint Shauns fault, in that he doesnt actively encourage it. The problem is that he doesnt deal with it. Many other sites would have nipped this problem in the bud; it isnt difficult; especially when you have access to the fools IPs. Trolling here by existing users is at an all-time high and thats easily dealt with.
Simon
Simon
21 July 2006, 01:13 PM
#20
Scooby Regular
Join Date: Jun 2006
Location: Norwich
Posts: 1,526
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GC8
It sint Shauns fault, in that he doesnt actively encourage it. The problem is that he doesnt deal with it. Many other sites would have nipped this problem in the bud; it isnt difficult; especially when you have access to the fools IPs. Trolling here by existing users is at an all-time high and thats easily dealt with.
Simon
Simon
21 July 2006, 01:25 PM
#21
Scooby Regular
Join Date: Oct 2004
Location: There is only one God - Elvis!
Posts: 8,328
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GC8
It sint Shauns fault, in that he doesnt actively encourage it. The problem is that he doesnt deal with it. Many other sites would have nipped this problem in the bud; it isnt difficult; especially when you have access to the fools IPs. Trolling here by existing users is at an all-time high and thats easily dealt with.
Simon
Simon
Valid point!
21 July 2006, 01:27 PM
#22
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
whilst its easy banning existing users, its a lot harder banning ip addresses as most people do not have static ip's. However by banning existing users they will just create a new username and so it goes on and on.......
21 July 2006, 01:30 PM
#23
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
Back to the point, theres a STIv7 short engine in the For sale section for £500 - thats the cheapest route
21 July 2006, 01:36 PM
#24
Scooby Regular
Join Date: Aug 2003
Location: Sheffield; Rome of the North
Posts: 17,582
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jaytc2003
whilst its easy banning existing users, its a lot harder banning ip addresses as most people do not have static ip's. However by banning existing users they will just create a new username and so it goes on and on.......
Simon
21 July 2006, 02:11 PM
#26
Scooby Regular
iTrader: (1)
Join Date: Aug 2005
Location: Manchester ish
Posts: 18,547
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GC8
You neednt ban the IP address. It isnt difficult to identify who the troll is. When you have done that you delete the account and warn the 'real' user to desist. If they continue then you email abuse@theirISP. If they continue their ISP will pull the plug. They will stop; problem solved.
Simon
Simon
Paulbstiv3
Flat four do the short 2.5 engine for I think for around about £1200 ish, I have bought things from there in the past and svs has been good.
The thing is though if you go that route then you will need to spend on other things like a mappable ecu etc so costs soon add up. Best bet is a 2nd hand short motor then personally I would split it and do the bearings etc before reassembling it. This will be the cheapest option.
Sorry to hear its has gone btw
21 July 2006, 05:01 PM
#27
As a fellow Sti v3 owner sorry to read about the failure.
Nobody has really answered over the years the 'hit' on the insurance for the 2.5, but many are running 2.5's now so maybe not too bad.
Fitting the 2.5 short block is a bit of a meccano job, search for Dyney's thread in projects section (goes back about 18 months or more) he did a great thread on a DIY 2.5 conversion.
Personally I would look hard at the £500 engine, but that is cheap for a good engine!
David at www.apiengines.com is a real mountain of experience, and you should call him first.
Finally, to the 'chav/Geek/Pratt etc' influence on Snet I totally agree that such fools should be severed from participating. Shaun has a tough job on to do that though.
Good luck with your choice.
Graham
Nobody has really answered over the years the 'hit' on the insurance for the 2.5, but many are running 2.5's now so maybe not too bad.
Fitting the 2.5 short block is a bit of a meccano job, search for Dyney's thread in projects section (goes back about 18 months or more) he did a great thread on a DIY 2.5 conversion.
Personally I would look hard at the £500 engine, but that is cheap for a good engine!
David at www.apiengines.com is a real mountain of experience, and you should call him first.
Finally, to the 'chav/Geek/Pratt etc' influence on Snet I totally agree that such fools should be severed from participating. Shaun has a tough job on to do that though.
Good luck with your choice.
Graham
21 July 2006, 05:03 PM
#28
Scooby Regular
Join Date: Mar 2003
Location: North Yorks.
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GC8
You neednt ban the IP address. It isnt difficult to identify who the troll is. When you have done that you delete the account and warn the 'real' user to desist. If they continue then you email abuse@theirISP. If they continue their ISP will pull the plug. They will stop; problem solved.
Simon
Simon
