Fitted induction kit, now car won't idle or rev
#1
Fitted induction kit, now car won't idle or rev
After fitting the kit my 2001 turbo will not idle, or rev. does the ECU have to be reset after fitting? Or is the MAF buggered? all was working fine until the kit was fitted. Anyone had this problem?
Thanks
Thanks
#2
Originally Posted by trev.p
After fitting the kit my 2001 turbo will not idle, or rev. does the ECU have to be reset after fitting? Or is the MAF buggered? all was working fine until the kit was fitted. Anyone had this problem?
Thanks
Thanks
The Maf's certainly don't like induction kits, i changed for an induction and replaced the Maf for good measure.
#3
Scooby Regular
Join Date: Dec 2000
Location: West Yorkshire
Posts: 3,828
Likes: 0
Received 0 Likes
on
0 Posts
You could have it the wrong way round? On my car when the MAF was put the wrong way round it would start and then the revs would climb to the idle point and then it would just cut out instantly.
HTH.
HTH.
#5
Scooby Regular
iTrader: (6)
Join Date: Apr 2005
Location: Stroke it baby!
Posts: 33,828
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SPEN555
You could have it the wrong way round? On my car when the MAF was put the wrong way round it would start and then the revs would climb to the idle point and then it would just cut out instantly.
HTH.
HTH.
#7
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM