boost gage
#2
find a vacuum line,such as the one that goes to the actuator on the turbo,get a t piece and some silicone tubing and t off the line and run the silicone tubing through the bulkhead into the cabin
#3
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: high wycombe
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by big_wig
find a vacuum line,such as the one that goes to the actuator on the turbo,get a t piece and some silicone tubing and t off the line and run the silicone tubing through the bulkhead into the cabin
#4
right,ok,you know the turbo yeah? there should be a round pie shaped object on it with and arm that comes out of it onto another arm on the exhaust side of the turbo (opposite of the inlet),this controls the boost of the turbo,on the pie shaped object there should be a pipe attached? this is a vacuum line. if u let the car idle and disconnect it you'll notice the vacuum. make any sense?
#5
Scooby Regular
Thread Starter
Join Date: Dec 2005
Location: high wycombe
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by big_wig
right,ok,you know the turbo yeah? there should be a round pie shaped object on it with and arm that comes out of it onto another arm on the exhaust side of the turbo (opposite of the inlet),this controls the boost of the turbo,on the pie shaped object there should be a pipe attached? this is a vacuum line. if u let the car idle and disconnect it you'll notice the vacuum. make any sense?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM