Anyone know a dealer in the S.East who can install a Prodrive ECU?
02 November 2001, 11:07 AM
#6
To be honest, you can probably do it with a 10mm socket spanner 
No real technical ability required as it is a direct replacement for the OE one, just unplug the wires, unbolt from the floor, reverse the process for the PD one & drive off.
Otherwise someone like ScoobySport could definately do it.
Enjoy
No real technical ability required as it is a direct replacement for the OE one, just unplug the wires, unbolt from the floor, reverse the process for the PD one & drive off.
Otherwise someone like ScoobySport could definately do it.
Enjoy
02 November 2001, 11:08 AM
#7
Scooby Regular
Join Date: Aug 1999
Posts: 7,957
Likes: 0
Received 0 Likes
on
0 Posts
Have you got the ecu?
if so, I think you would be embarassed to know how easy it is to do.
Pointless paying someone when it is so simple.
Pull up carpet in passenger footwell best to remove trim along door sill which holds it down.
Unbolt three bolts holding lareg protective kick panel over ecu.
Unscrew ecu metal case from floor. Unplug multiplug. Plug in to new ecu, and reassemble.
Takes five mins maximum.
if so, I think you would be embarassed to know how easy it is to do.
Pointless paying someone when it is so simple.
Pull up carpet in passenger footwell best to remove trim along door sill which holds it down.
Unbolt three bolts holding lareg protective kick panel over ecu.
Unscrew ecu metal case from floor. Unplug multiplug. Plug in to new ecu, and reassemble.
Takes five mins maximum.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM