How to stop I/C water spray water smelling?
15 May 2006, 10:40 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Northants
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
How to stop I/C water spray water smelling?
Apart from using it a lot
Just been cleaning the boot out and the water in the container was very stale and the top of the container is slimey!
Is there anything I can put in it to stop it happening again?
Just been cleaning the boot out and the water in the container was very stale and the top of the container is slimey!
Is there anything I can put in it to stop it happening again?
15 May 2006, 10:50 PM
#2
Scooby Regular
Join Date: Mar 2003
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate,
i am nearly sure you can buy some kind of stuff to put in the tanks which stops slime and smell. I think you can get it from halfords and such places.
Hope that helps Graham.
i am nearly sure you can buy some kind of stuff to put in the tanks which stops slime and smell. I think you can get it from halfords and such places.
Hope that helps Graham.
16 May 2006, 07:22 AM
#7
Originally Posted by DanUK
Apart from using it a lot
Just been cleaning the boot out and the water in the container was very stale and the top of the container is slimey!
Is there anything I can put in it to stop it happening again?
Just been cleaning the boot out and the water in the container was very stale and the top of the container is slimey!
Is there anything I can put in it to stop it happening again?
Shaun
Trending Topics
16 May 2006, 12:41 PM
#8
Scooby Regular
Join Date: Mar 2006
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by urban
You are meant to use distilled water in it - stops the nozzle from blocking up.
Shaun
Shaun
17 May 2006, 09:19 AM
#9
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Northants
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by urban
You are meant to use distilled water in it - stops the nozzle from blocking up.
Shaun
Shaun
Thanks Urban!
17 May 2006, 11:05 AM
#11
Scooby Regular
Thread Starter
Join Date: Mar 2006
Location: Northants
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Butty
Stagnant water with slime suggests you're not using the spray very often!
Try and get the bottle empty in a month at least!
Nick
Try and get the bottle empty in a month at least!
Nick
I will take up your challenge!!!
17 May 2006, 11:08 PM
#17
I seem to remember the aquamist site has a sticky on where to get methanol 
As methanol is totally miscible with water then as a 50 / 50 mix it's not flamable when used as an IC spray..............if it gets into the cylinders then thats a different matter........LOL
I have a Spec C tank and an aquamist kit ready to fit for methanol injection.....just need to find the time
Shaun
As methanol is totally miscible with water then as a 50 / 50 mix it's not flamable when used as an IC spray..............if it gets into the cylinders then thats a different matter........LOL
I have a Spec C tank and an aquamist kit ready to fit for methanol injection.....just need to find the time
Shaun
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM