Power washers - bad for car?
#1
Scooby Regular
Thread Starter
I have a K'Archer power washer, and recently did our back yard with it. It was very powerful, and managed to strip all the crap and slime from the flags, as well as the stain from the bench
I now fancy using it on my MR2 but am not sure whether it will damage the paint.
Has anyone tried this?
Will it knacker my car?
DW
I now fancy using it on my MR2 but am not sure whether it will damage the paint.
Has anyone tried this?
Will it knacker my car?
DW
#2
They are fine to use on a car as long as you don't get too close. They are excellent for cleaning alloys and under the wheelarches etc.
When I was washing my girlfriends car with one I got the nozzle too close to the car and it took a chunk out of the rubber bump strop along the side of the door.
When I was washing my girlfriends car with one I got the nozzle too close to the car and it took a chunk out of the rubber bump strop along the side of the door.
#3
I use one on the P1 without any problems.
However, I understand that most problems are related to using them near ducts and radiators/intercoolers as they flatten the fins and can force water where you don't want it.
Josh
However, I understand that most problems are related to using them near ducts and radiators/intercoolers as they flatten the fins and can force water where you don't want it.
Josh
#4
Scooby Regular
I used one before on my RB5. It sripped the paint off of my colour-coded splash gaurds. Put that down to me just getting too close.
I've used one since, but haven't dared pointing it at the gaurds since I had them resprayed. Great for alloys though.
Stefan
[Edited by ozzy - 25/10/2001 14:34:41]
I've used one since, but haven't dared pointing it at the gaurds since I had them resprayed. Great for alloys though.
Stefan
[Edited by ozzy - 25/10/2001 14:34:41]
#5
Scooby Regular
Join Date: Jan 2001
Location: Yorkshire.... Silly!!
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Same old story. I got too close to my front bumper with mine and a chunk of paint just dissappeared down the road.
Great on the alloys, just keep the high pressure nozle around 10 inchs away from paint, and no problems.
Cheers
Simon
Great on the alloys, just keep the high pressure nozle around 10 inchs away from paint, and no problems.
Cheers
Simon
#7
Scooby Regular
Join Date: Sep 1999
Location: In the garage or in bed
Posts: 7,278
Likes: 0
Received 0 Likes
on
0 Posts
Any body want to buy one ! i have a few for sale
Karcher New style K300 £85.00 each normaly£120.00 each,(1600psi + chemical pickup,adjustable lance 6mtr long hose with 12 months warranty
And thease are legit not knocked off.
Huxley
Karcher New style K300 £85.00 each normaly£120.00 each,(1600psi + chemical pickup,adjustable lance 6mtr long hose with 12 months warranty
And thease are legit not knocked off.
Huxley
Trending Topics
#8
Scooby Regular
Thread Starter
Cheers all
It is mainly for the alloys, as no amount of wonder wheel type stuff moves the brake dust.
Will just have to watch the 'delicate' bits.
One more thing - the car is mid-engined, and has big vents in the back so it is used to getting plenty of rain on the engine, and also buckets of water when I wash it.
Would it be worth risking using the jet-washer in the engine bay? i.e. I would first cover all electrics, and other bits, in plastic bags etc.
DW
It is mainly for the alloys, as no amount of wonder wheel type stuff moves the brake dust.
Will just have to watch the 'delicate' bits.
One more thing - the car is mid-engined, and has big vents in the back so it is used to getting plenty of rain on the engine, and also buckets of water when I wash it.
Would it be worth risking using the jet-washer in the engine bay? i.e. I would first cover all electrics, and other bits, in plastic bags etc.
DW
#9
The pressure washer in the engine bay - I'd really recommend not mate! On modern engines it's not just the obvious electrics - it's dead easy to knock out something you didn't expect, as the guy who bought my 3 series can vouch. He carefully cleaned the engine (!) and knacked the air-flow sensor (guaranteed to knack if you wet your BM engine).
Dunno about other cars but I would imagine there's little pitfalls
like that on most - you'd probably be better getting a valetting specialist or dealer to do it, then you can blame them.
All the best,
Dean
Dunno about other cars but I would imagine there's little pitfalls
like that on most - you'd probably be better getting a valetting specialist or dealer to do it, then you can blame them.
All the best,
Dean
#12
Moderator
iTrader: (1)
LOL how old is this thread
Anyhoo. Variable power is just the lance attachment. There's a reed valve in the end which widens the spray pattern and hence reduces the force (power).
My lance attachment of choice is a fixed brass fan jet nozzle. Its a fan pattern but has a little more force than a variable lance on fan/wide setting.
Pencil jets, or variable lances set on pencil, or "rota blasters" (and variations of) can damage poor quality paint surfaces (i.e fetches the paint off).
Usually that is anywhere thats had a "chips-away" type micro repair. Or done by a shoddy bodyshop (please no posting of links to the thread in the projects section please ). That's how I found out my NSF wheel had been refurbed...the jet wash fetched the sodding paint off - whoever painted it didn't bother to rub down (key) the existing paint!
Anyhoo. Variable power is just the lance attachment. There's a reed valve in the end which widens the spray pattern and hence reduces the force (power).
My lance attachment of choice is a fixed brass fan jet nozzle. Its a fan pattern but has a little more force than a variable lance on fan/wide setting.
Pencil jets, or variable lances set on pencil, or "rota blasters" (and variations of) can damage poor quality paint surfaces (i.e fetches the paint off).
Usually that is anywhere thats had a "chips-away" type micro repair. Or done by a shoddy bodyshop (please no posting of links to the thread in the projects section please ). That's how I found out my NSF wheel had been refurbed...the jet wash fetched the sodding paint off - whoever painted it didn't bother to rub down (key) the existing paint!
Last edited by ALi-B; 20 January 2014 at 01:23 PM.
#22
Scooby Regular
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
Disagree
Jet washing is terrible for getting into places , perishing seals, drying out bearings, pivots , etc etc ,, I gave the brake caliper as an example , as you see every day as an occurance , people sticking the lance inside there wheels ....
Personally I would take the wheel off to wash by hand....
Jet washing is terrible for getting into places , perishing seals, drying out bearings, pivots , etc etc ,, I gave the brake caliper as an example , as you see every day as an occurance , people sticking the lance inside there wheels ....
Personally I would take the wheel off to wash by hand....
#24
Scooby Regular
#25
Scooby Regular
iTrader: (5)
The Karcher hd series has variable flow from 250l to 650l. I had a bumper repair at Jesty`s Christchurch last year, which peeled off on the first wash, and they claimed that I should never use a powerwasher on a car, and that I would have to contribute to the repair. As I use it for professional cleaning services, I stuck to my guns, and they backed down. Their next repair was done on car, and they blistered the next panel. It seems a common claim by insurers and bodyshops to blame powerwashers.
Even with a variable flow valve, it is much faster to just vary the nozzle to car distance.
Even with a variable flow valve, it is much faster to just vary the nozzle to car distance.
#26
Scooby Regular
Join Date: Nov 2012
Location: mid wales
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM