flat4_ire

hey guys,
i know people probably throw up a few threads like this, but just interested to know others faired out on the dyno, especially other STi Type R's like mine, im getting her on the RR in a few weeks..hopefully my 98 STi Type R V4 is lookin at over 300hp anyway..
mods are:

-Helix Turbo Up-pipe
-Open neck Downpipe
-Straight Thru Centre pipe
-Blitz Nurspec rear section
-Equal length headers
-Blitz Induction
-Lightened Flywheel
-Apexi Power FC ECU mapped by Andy F. on 100RON Fuel @ 1.3BAR

PAUL CRAFTS

Yes u should crack 300 have u still got standard turbo on.Just hade my car uprated at scooby-clinic,tdo5 turbo,full de-cat nur-spec type-r), headers & up-pipe rapped,eagle rods,new crank,high pressure pump, fuel-reg,550 injectors, new ecu.Should get about 350-370bhp? Hope yours goes well. P,S my car 96 type r-a sti...

ali_j

sounds good you should be cracking 300+ easy looking at other people with basic omds like zorst and induction etc just get over 300. and a question i want answered is whats the standard boost on a V4 type r?

flat4_ire

no its not standard boost on the type r, i think the standard is around 1.15bar or so? when gettting the car mapped by Andy we tried it at 1.3bar and she sat very nicely at that with no knock/det or anything so i left it at that, pulls very impressively anyway so it will do me for a while, she actually boosted to 1.36 there the other day, no reason why she shouldnt be pulling in excess of 310bhp i think, with the mods she has and running 75% 95RON and 25% 114RON

FASTER MIKE!!

my type r v5 made 296 with 1.45bar peak with similar mods, no headers. on g-forces rr so thats prob just over 300 on well lane. you should be making over 300 easy

flat4_ire

hopefully anyway, to be honest id be dissappointed if it pulled less than 300hp! as long as shes getting adequate air to the intercooler she should be flying

Stiver3

Mine made 320, with just a full decat, so yours should make easily over 300HP. But dont be dissapointed if it comes out below or not what you expected as its how it drives on the real-road which is the main thing...

Good luck...

Stiver3

ali_j

asked because the type r i imported goes to a steady 1.3 bar and was thinking its not standard, gotta check out if the ecu has been changed or remapped know.

thanks

Bubba po

I'm glad that you've got sensible omds.

flat4_ire

?? u saying they aint sensible mods? regarding the other lad there, 1.3bar is def not standard boost, standard boost is under 1.2bar, never know what those jappy boys do be at before the car comes over

chrisp

my my00 wrx ra ran about 1.15-1.2bar out of the factory but on a vf29 turbo, iirc you will be on a vf28 or maybe a vf24

flat4_ire

mine is a IHI VF24

chrisp

last rr graph for mine runs about 1.4 bar and mapped for optimax

flat4_ire

thats impessive, il let you know how mine goes ayway, in 3 weeks, its 15 scoobies doing it up there, think ive the only type r, she feels very very quick, and ive been in a few sti's, id be v.happy with over 310hp, as long as she gets adequate cold air in