scoobystue

iTrader: (3)

im currently looking for either a wrx wagon or saloon,on a l,m or n plate,what should i be looking for?? any major things to keep my eyes open for? dont wanna buy a lemon

Imprezive

You could flash back the ECU for any errors, if the owner doesn't mind that is.
Just a thought.

scoobystue

iTrader: (3)

hows that done??? as you can guess im completly new to all this onder2:
plus are there any good books,mags and sites(other than this one)with technical information so i can learn more about them

scoobfan

Make sure the car is started from cold and look out for any Blueish smoke
from the exhaust, signs of Turbo wear.

Listen carefully to the engine for any heavy knocking which could be signs
of an Crank on its way out.

A light knocking from either the extreme left or right of the engine could be
signs of piston slap.

Take the car for a good run untill hot, obviously when driving you'll know
if the gearbox is any good or not, that also applies to brakes and steering.

Once you get the car back pop the bonnet (Engine still running) and look behind the nearside
headlamp you will see a filler tube with a yellow cap on it, remove the cap
and look for any bubbles or frothing, this checks for signs of a dodgy head
gasket.

I would after experience get a full RAC/AA inspection done for a couple
of hundred quid, it could save you a couple of grand !!

All the best with the search anyway bud.

Rob

scoobystue

iTrader: (3)

thanks rob thats very helpfull i think i will get an aa/rac inspection done as i donrt have a great deal of experience with turbo cars,last thing i need it to spend £5k+ then end up with a donkey

LUCKO

iTrader: (3)

DO NOT buy/view a vehicle that has been fitted with lexus lights!!

SHAME ON ANYONE WHO HAS THEM

scoobystue

iTrader: (3)

that was my 1st mod i had lined up

LUCKO

iTrader: (3)

sorry mate but they do look horrid, just get some nice wheels instead

Best Of Luck

scoobystue

iTrader: (3)

i had lexus lights on my 306 but took them off and stuck them on the mrs"s 306 instead wont be doing many mods as ive done enough modding in my time,want something standard(ish) thats reliable but i am fitting a blow off valve and exhuast system