Why no heat shield on the MY03's turbo?
#1
Why no heat shield on the MY03's turbo?
or was mine a Friday car?
I think i'm correct in saying the earlier cars had a sheild around the turbo to protect the top up bottles close by? Looking at mine it doesnt have one. Any reason for this?
I think i'm correct in saying the earlier cars had a sheild around the turbo to protect the top up bottles close by? Looking at mine it doesnt have one. Any reason for this?
#2
Scooby Regular
Join Date: Oct 2001
Location: Here, there and everywhere
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
gary,
is it fully decatted from the turbo back ?
If so they might not have put it back on when they changed the downpipe ?
Group buy - i need one too
is it fully decatted from the turbo back ?
If so they might not have put it back on when they changed the downpipe ?
Group buy - i need one too
#3
group buy my arsxe ........ its a dealer supplied full de-cat so if it aint on they can get me a new for for nowt ..... they dont just fall off !!
Poxy weather .... was gonna clean the car today ,.,grrrrrrr
Poxy weather .... was gonna clean the car today ,.,grrrrrrr
Trending Topics
#9
Ecu Specialist
It should have a heat sheild and I would say MUST have a heat shield as that corner of the intercooler will toast without it which means higher charge temps which means det (possibly) which means ...
Its just pure laziness to not refit it, ok so they have to trim it a bit but that takes maybe 5 mins of anyones time.
Go back and insist, the car is arguably even more at risk without it.
cheers
bob
Its just pure laziness to not refit it, ok so they have to trim it a bit but that takes maybe 5 mins of anyones time.
Go back and insist, the car is arguably even more at risk without it.
cheers
bob
#12
Scooby Regular
Join Date: Apr 2003
Location: South Bucks
Posts: 3,213
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gutmann pug
group buy my arsxe ........ its a dealer supplied full de-cat so if it aint on they can get me a new for for nowt ..... they dont just fall off !!
Poxy weather .... was gonna clean the car today ,.,grrrrrrr
Poxy weather .... was gonna clean the car today ,.,grrrrrrr
Still, at least it was warm enough earlier on for me to complete the front de-tangonisation.
#15
When the PPP kit is fitted to the 03sti they have to cut away some of the heatsheild to make it fit back on. It must be fitted cos it gets dam hot around there without it.
Dipster
Dipster
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM