cam belt
#1
some one must be able to help me, i have just bought my first impreza, its a 94 wrx (ej20), i want to change the cam belt, i have changed many cam belts on other engines but am a novis at the flat four,so can anyone give me step by step instuctions please.
#2
The same as most generaly.
Remove crank pulley, i cant remember if its left hand thread or not.
Turn the engine to see where all the marks line up.
If memory serves me rite i then removed the tensioner pulley.
The worst job is holding the 4 cam wheels still, small blocks of wood is what i used.
Greasemonkey is the chap to speak to as i cant remember the correct procedure for re-tensioning. About 2 years since i done one.
When its all on, turn the engine by hand and check all the marks still line up, do it a few times to make sure.
Remove crank pulley, i cant remember if its left hand thread or not.
Turn the engine to see where all the marks line up.
If memory serves me rite i then removed the tensioner pulley.
The worst job is holding the 4 cam wheels still, small blocks of wood is what i used.
Greasemonkey is the chap to speak to as i cant remember the correct procedure for re-tensioning. About 2 years since i done one.
When its all on, turn the engine by hand and check all the marks still line up, do it a few times to make sure.
Thread
Thread Starter
Forum
Replies
Last Post
Jonny mac
ScoobyNet General
10
09 October 2015 12:25 PM