changing ecu's
26 July 2003, 02:59 AM
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
As has been pointed out, around 245-250bhp, more torque in the midrange, better performance, but i doubt that you would get 280+bhp out of it (
)
The power figure is quoted running super unleaded fuel too btw.
Tony
)The power figure is quoted running super unleaded fuel too btw.
Tony
26 July 2003, 09:09 AM
#5
to get 245 ish you'll need to do something with the exhaust. The PPP pack has back box and cat replacement for the centre section cat. Also there is a restrictor with a PPP too. You'll need to change the turbo hoses as well as they often split. the PPP has these as well.
I managed to get a second hand PPP with a restrictor. I just used complete scoobysport center and rear sections £300. (second hand too) and bout a set of hoses for about 80.
I managed to get a second hand PPP with a restrictor. I just used complete scoobysport center and rear sections £300. (second hand too) and bout a set of hoses for about 80.
26 July 2003, 07:42 PM
#6
Scooby Newbie
Thread Starter
Join Date: Jul 2003
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys!!! Any sugestions where to look for ppp kit new or second hand,AWD Motersport have a second hand Magnex 6x4 Back box and de-cat pipe for £200 Is this a good buy?
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM