Notices
ScoobyNet General General Subaru Discussion

My 99 Rough Running, Help

Thread Tools
 
Search this Thread
 
Old Feb 17, 2000 | 07:23 PM
  #1  
Recruiter's Avatar
Recruiter
Thread Starter
Scooby Newbie
 
Joined: Jan 2000
Posts: 9
Likes: 0
Post

My MY99, 11,000 on the clock running with Induction Kit and Mongoose exhaust is running Lumpy/ Picking up poorly in all gears between 2,700 and 3000 revs.above 3000 revs it runs like a dream. Can any body Help me and throw some light on the probable cause.
Thanks Geoff
Reply
Old Feb 17, 2000 | 07:41 PM
  #2  
Ian Cook's Avatar
Ian Cook
Scooby Regular
 
Joined: Nov 1998
Posts: 5,485
Likes: 0
From: Northampton
Post

Which Induction kit are you using ?

The problem sounds very much like the MAF sensor has failed, a common problem with 99 cars and air filters that do not filter small enough particles, or use too much oil. The HKS Induction kit was a prime example for causing this.
Reply
Old Feb 17, 2000 | 08:02 PM
  #3  
Recruiter's Avatar
Recruiter
Thread Starter
Scooby Newbie
 
Joined: Jan 2000
Posts: 9
Likes: 0
Post

Thanks for the reply Piper X kit, had the problem prior to fitting though not as severe
Geoff
Reply
Old Feb 17, 2000 | 08:06 PM
  #4  
Ian Cook's Avatar
Ian Cook
Scooby Regular
 
Joined: Nov 1998
Posts: 5,485
Likes: 0
From: Northampton
Post

The MAF sensor is probably the cause still, a dealer may be able to check it for you, but its over 200 quid to replace it, unless you find an understanding dealer.
Reply
Old Feb 17, 2000 | 10:26 PM
  #5  
Recruiter's Avatar
Recruiter
Thread Starter
Scooby Newbie
 
Joined: Jan 2000
Posts: 9
Likes: 0
Post

Guess I need to chat me dealer up!!!!
Reply
Old Feb 18, 2000 | 09:00 AM
  #6  
GaryC's Avatar
GaryC
Scooby Regular
 
Joined: Jan 2000
Posts: 1,999
Likes: 0
Post

Geoff

I had similar problem on my MY99. First happened just after I had prodrive performance pack done. But turned out to be unconnected - dealer cleaned dump valve and its been fine ever since.

PS - Geoff Painter? - as in ex-Robert Half Leeds?
Reply
Old Feb 18, 2000 | 10:26 AM
  #7  
Trout's Avatar
Trout
Scooby Regular
iTrader: (1)
 
Joined: Jan 1999
Posts: 15,271
Likes: 0
From: UK
Unhappy

If the MAF is damaged then you will get the CHECK ENGINE light coming on - if not all the time at least sporadically, especially if it is only misreading - if the MAF has failed then the engine will not work unless you disconnect it (as a safe get you home trick).

However in defence of the HKS Induction Kit - yes some cars fitted with this have had MAFs fail, but also true with Blitz, other induction kits and standard cars. The MY99 is fragile and does not seem to suffer vibration well at all.

Strangely it would seem to be the same MAF is used on all MY99 cars, including UK, Japanese, Impreza and Legacy Turbos - but it only seems to be an issue with imported cars (oh and Impreza 2.5RSs in the US).

R
Reply
Old Feb 18, 2000 | 07:22 PM
  #8  
Recruiter's Avatar
Recruiter
Thread Starter
Scooby Newbie
 
Joined: Jan 2000
Posts: 9
Likes: 0
Smile

Garry C
Yes the very same Geoff Painter ,who are you ? must have an excellent memory that was 7 years ago a lot of water and money has gone way under the bridge since then.email if you can
Geoff
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Benji554
Wanted
3
Jun 14, 2016 11:19 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Billet
ScoobyNet General
42
Oct 14, 2015 10:38 PM
FuZzBoM
Wheels, Tyres & Brakes
16
Oct 4, 2015 09:49 PM




All times are GMT +1. The time now is 06:04 PM.