Silver gear surround
#1
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Looking for advice on how to refresh and refurbish the silver gear surround on my Blobeye WRX/STI and if indeed it is possible to do this mine is covered in scratches and generally looks worn and I would like to return it to looking half decent.
#2
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
do you mean the whole part with the ashtray attached or just the bezel that goes around the boot?
A guy I know removed the whole middle trim section, wet sanded it back with fine sand paper (800 or 1000 grit) , use some plastic primer and silver paint with a light clear coat over the top, and it come up pretty good.
A guy I know removed the whole middle trim section, wet sanded it back with fine sand paper (800 or 1000 grit) , use some plastic primer and silver paint with a light clear coat over the top, and it come up pretty good.
#4
Scooby Regular
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
under paint its an alloy,remove paint ,polish it than it will look better than new
Thread
Thread Starter
Forum
Replies
Last Post
kwan88
ScoobyNet General
8
16 April 2013 06:36 AM