Gearbox splashguard/undertray
#1
Scooby Regular
Thread Starter
Gearbox splashguard/undertray
Hello all, I bought a gearbox undertray/splashguard for a blobeye as I seen mine doesn’t have one. I only realised its meant to have one because there was one for sale on eBay 🤔
any help on how it goes on please eg. Pictures, thanks
any help on how it goes on please eg. Pictures, thanks
Last edited by johno01; 29 June 2022 at 06:42 PM.
#2
Scooby Regular
Johno
no pics I’m affraid, sorry.
But its pretty straightforward once looking from underneath.
sure there is 1no. 14mm (head) bolt and a couple of push clips.
halfway down this thread there is a decent pic of the orientation
https://forums.nasioc.com/forums/sho....php?t=2733846
I’m fairly sure it attaches to the subframe and engine under tray (all tied together) using 2no. grey “u shaped” clips. Mine were missing and it was flapping about a bit … I got them off of eBay for easiness but they came from Japan, can prob get them from subaru in uk.
part no. 56411FA000 “CLip und cov r”
no pics I’m affraid, sorry.
But its pretty straightforward once looking from underneath.
sure there is 1no. 14mm (head) bolt and a couple of push clips.
halfway down this thread there is a decent pic of the orientation
https://forums.nasioc.com/forums/sho....php?t=2733846
I’m fairly sure it attaches to the subframe and engine under tray (all tied together) using 2no. grey “u shaped” clips. Mine were missing and it was flapping about a bit … I got them off of eBay for easiness but they came from Japan, can prob get them from subaru in uk.
part no. 56411FA000 “CLip und cov r”
Last edited by Conor.s1; 29 June 2022 at 10:15 PM.
#3
Scooby Regular
Thread Starter
Johno
no pics I’m affraid, sorry.
But its pretty straightforward once looking from underneath.
sure there is 1no. 14mm (head) bolt and a couple of push clips.
halfway down this thread there is a decent pic of the orientation
https://forums.nasioc.com/forums/sho....php?t=2733846
I’m fairly sure it attaches to the subframe and engine under tray (all tied together) using 2no. grey “u shaped” clips. Mine were missing and it was flapping about a bit … I got them off of eBay for easiness but they came from Japan, can prob get them from subaru in uk.
part no. 56411FA000 “CLip und cov r”
no pics I’m affraid, sorry.
But its pretty straightforward once looking from underneath.
sure there is 1no. 14mm (head) bolt and a couple of push clips.
halfway down this thread there is a decent pic of the orientation
https://forums.nasioc.com/forums/sho....php?t=2733846
I’m fairly sure it attaches to the subframe and engine under tray (all tied together) using 2no. grey “u shaped” clips. Mine were missing and it was flapping about a bit … I got them off of eBay for easiness but they came from Japan, can prob get them from subaru in uk.
part no. 56411FA000 “CLip und cov r”
#4
Scooby Regular
The front of the gearbox cover is held in place by the clips marked "1" for the engine cover
#5
Scooby Regular
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post