Bc coilovers fitment
#1
Scooby Regular
Thread Starter
Bc coilovers fitment
Hi I ordered some bc coilovers from scoobyworld and got them set to 20mm lower than standard. The front went in fine but the back was knowhere near the hub would not go low enough to fix onto bottom of coilover. I had to lower coilover another 40mm to get it in! Am I missing something? As the front sits lovely but back is noticeably lower.
#2
Scooby Regular
So now it’s bolted on then just adjust the coilover to the height you want , the way the hubs are connected to the car the front set up v the rear set up with trailing arms etc will effect the position / height of the hub when the car is jacked up, 20mm on the front will not be 20mm on the rear as the front is heavier due to the engine , but simply change the rear sporting height to suit how you want it , measure the arch to ground height on one side plus the threads on the coilover and apply same to the other side 👍
Thread
Thread Starter
Forum
Replies
Last Post