Hawkeye - Bonnet catch not working
#1
Scooby Regular
Thread Starter
Hawkeye - Bonnet catch not working
Morning guys, I've gone to do some bits under the bonnet on my 2006 Hawkeye Wagon this morning and the bonnet catch is no longer working for some reason. It just wont pop the bonnet no matter how far I pull it.
Is there another way I can get it open somehow??
Is there another way I can get it open somehow??
#2
Scooby Regular
https://www.scoobynet.com/scoobynet-...the-alarm.html
try this link , check cable is returning so release catch in the car is ok , try lots of grease wd40 etc
try this link , check cable is returning so release catch in the car is ok , try lots of grease wd40 etc
#5
Scooby Regular
Thread Starter
I had to take the front grille off in the end, it was just seized as a good pull on the cable whilst lifting the bonnet popped it. Works fine again now after lubrication, just have to not neglect it.
#6
Scooby Regular
good to hear it’s sorted , wd40 to get rid of the rust , then cover it in grease for a longer term solution , it’s like door hinges often get neglected for a bit of grease until they start squeaking
Thread
Thread Starter
Forum
Replies
Last Post