Powder coat or paint ?? Rims need refurbing
#1
Powder coat or paint ?? Rims need refurbing
Hi peeps
ok so I have bought a used set of alloys with the intention of getting them
refubed but alittle unsure as to what the best method is.
i just bought some work emotions d9r alloy in 18” the wheels do have
some light cubing on all four of the alloys nothing seriously only very light
i want to get them Ina similar or slightly darker colours to the jr’s below
I think they call it hyper black or similar to xxr black crome.. I’m just looking for
advise, I’ve read threads about it been not a good idea to powder coat wheels..
also if anyone knows of any decent alloy repair / paint places in Surrey
coud you let us know
cheers CSF
ok so I have bought a used set of alloys with the intention of getting them
refubed but alittle unsure as to what the best method is.
i just bought some work emotions d9r alloy in 18” the wheels do have
some light cubing on all four of the alloys nothing seriously only very light
i want to get them Ina similar or slightly darker colours to the jr’s below
I think they call it hyper black or similar to xxr black crome.. I’m just looking for
advise, I’ve read threads about it been not a good idea to powder coat wheels..
also if anyone knows of any decent alloy repair / paint places in Surrey
coud you let us know
cheers CSF
Last edited by crazyspeedfreakz; 22 February 2019 at 12:43 PM.
#4
A good paint job is best imo,I had a set of standard fit OZ on my old P1 powder coated by a firm in,I think Northampton,collected,powder coated and delivered back to me-looked absolutely fantastic,trouble was,when I had wheels balanced after new tyres,the coating started peeling off when the old weights were removed,it wasn’t a cheap job,cost around £360 iirc,this was around 12-13 years ago,I may have just been unlucky but I have had a few sets refurbed (painted) since and had zero problems,so this would be my choice every time,hope this helps
#5
Scooby Regular
iv had loads and loads of set of wheels powder coated ,, currently have two sets on my cars ,, never had a problem with any of them and have done loads for other people aswell and never had any come back with problems ,, I always go with powder coat
#6
Scooby Regular
Just had the “dragons” bbs alloys refurbed by demon wheels superb job with the powder coating received back with tyres on and ready balanced
still need to put them on tho :-(
Still needed the Pearl laquer at this point
How they went in salted and kerbed to death female drivers for you!
still need to put them on tho :-(
Still needed the Pearl laquer at this point
How they went in salted and kerbed to death female drivers for you!
#7
Scooby Regular
aaaai thinking of giving the impreza BBS’s in to go purple aswell
will look superbly chavtastic
you spinless matherfacker BRYAN
YOU go out with the lads get the **** taken out and get bullied for being a ***** that you are then you go home only to beat your Mrs up as you are a spinelesss coward that loves giving the ANGRY DRAGON
KINDA STUCK TO YOUR HEAD EHHH “that slap was a bit hard ehhh you son o& an old village bicycle
will look superbly chavtastic
you spinless matherfacker BRYAN
YOU go out with the lads get the **** taken out and get bullied for being a ***** that you are then you go home only to beat your Mrs up as you are a spinelesss coward that loves giving the ANGRY DRAGON
KINDA STUCK TO YOUR HEAD EHHH “that slap was a bit hard ehhh you son o& an old village bicycle
Last edited by ZANY; 23 February 2019 at 08:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RaymondH
General Technical
4
30 December 2004 07:22 PM