Stainless steel exhaust cleaning tips?
#5
Scooby Regular
Join Date: Jan 2017
Location: Central Scotland
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Having snow foamed the car:
-Spray on tar remover (wowo's), agitate with a soft bristled brush, rinse off
-Spray on iron fallout remover (autofiness), leave for a minute, agitate with a soft bristled brush, rinse
-Spray on APC (wowo's) agitate with brush, rinse off
After this you've removed everything as gently as possible and I generally leave it there. But if you want you can polish with meguiar's NXT or similar at this point with no risk of scratching.
-Spray on tar remover (wowo's), agitate with a soft bristled brush, rinse off
-Spray on iron fallout remover (autofiness), leave for a minute, agitate with a soft bristled brush, rinse
-Spray on APC (wowo's) agitate with brush, rinse off
After this you've removed everything as gently as possible and I generally leave it there. But if you want you can polish with meguiar's NXT or similar at this point with no risk of scratching.
Trending Topics
#8
Good call there. My missus bought some stainless steeling cheating for sink. Tried that and results were amazing. Only did a 15 min clean. Wish I had done a before and after. Even removed all the surface rust on exhaust tip. Although it does say on the back not to use on polished stainless steel surface. Does that mean exhausts?
Originally Posted by The Trooper 1815
Cillit Bang or any cheap multi surface cleaner - Lidl/Aldi circa 70p stuff is pretty good. Then a good metal polish works a treat.
Thread
Thread Starter
Forum
Replies
Last Post
neil_p
General Technical
6
03 July 2007 08:13 PM