How to remove 1997 door card on 2 door
#1
Scooby Regular
Thread Starter
Join Date: Sep 2014
Location: Newcastle
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
How to remove 1997 door card on 2 door
The lock doesnt seem to be locking, so i want to remove the door card and take a look. Anyone know where the screws are hidden for it.
I have the original manual , but i dont read japanese
I have the original manual , but i dont read japanese
#2
Scooby Regular
Same as any door card I would assume.......
Remove gusset cover
Remove window winder handle
Remove remote handle trim
Remove screw in door pull handle.
Pop the trim clips from the bottom upwards and lift off.
Remove gusset cover
Remove window winder handle
Remove remote handle trim
Remove screw in door pull handle.
Pop the trim clips from the bottom upwards and lift off.
#3
Scooby Regular
iTrader: (2)
If it's similar to the 4 door:
Two screws under pop-off covers. One under a cover near the door pull.
Slide the door HANDLE?LOCK surround towards the rewar and lift it off.
DO NOT TOUCH the large screw in the door HANDLE/LOCK.
Lift out the window sewitches and release the electrical connector if applicable.
Now start unclipping from the bottom rear face. The door card then lifts off and is removed.
To replace, start by ensuring it is hooked over at the top and correctly seated, and don't trap the elctrical wiring if applicable
Two screws under pop-off covers. One under a cover near the door pull.
Slide the door HANDLE?LOCK surround towards the rewar and lift it off.
DO NOT TOUCH the large screw in the door HANDLE/LOCK.
Lift out the window sewitches and release the electrical connector if applicable.
Now start unclipping from the bottom rear face. The door card then lifts off and is removed.
To replace, start by ensuring it is hooked over at the top and correctly seated, and don't trap the elctrical wiring if applicable
Thread
Thread Starter
Forum
Replies
Last Post