Hatchback cup holder
05 March 2017, 08:09 PM
#3
Scooby Regular
Thread Starter
Join Date: Oct 2016
Location: Killin
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
05 March 2017, 08:17 PM
#4
Scooby Regular
Last edited by Don Clark; 05 March 2017 at 08:28 PM. Reason: Item not available at partsouq
06 March 2017, 03:50 PM
#5
Scooby Newbie
Join Date: Mar 2017
Location: Los Angeles
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
06 March 2017, 06:12 PM
#6
Scooby Regular
Thread Starter
Join Date: Oct 2016
Location: Killin
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
I used the parts fiche above and phoned my local Subaru dealer at lunch. That's them ordered plus the inner arches that I need as mine are goosed.
Cheers guys
Cheers guys
07 March 2017, 06:53 PM
#7
Scooby Regular
Thread Starter
Join Date: Oct 2016
Location: Killin
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
What's the deal with the 3 mats in this picture, I went and picked up my inner arch liners today and I had ordered all the relevant parts I needed for the cup holder but only the cup insert was in stock.
So I'm waiting for the 2 bigger looking mats and the smaller one which you can see pictured above the cup insert.
My question is, what purpose does one of the big mats serve if the cup insert is going in on top of it?
Cheers
So I'm waiting for the 2 bigger looking mats and the smaller one which you can see pictured above the cup insert.
My question is, what purpose does one of the big mats serve if the cup insert is going in on top of it?
Cheers
Trending Topics
07 March 2017, 09:02 PM
#8
Scooby Regular
What's the deal with the 3 mats in this picture, I went and picked up my inner arch liners today and I had ordered all the relevant parts I needed for the cup holder but only the cup insert was in stock.
So I'm waiting for the 2 bigger looking mats and the smaller one which you can see pictured above the cup insert.
My question is, what purpose does one of the big mats serve if the cup insert is going in on top of it?
Cheers
So I'm waiting for the 2 bigger looking mats and the smaller one which you can see pictured above the cup insert.
My question is, what purpose does one of the big mats serve if the cup insert is going in on top of it?
Cheers
The "cupholder insert" can be fitted either way around.
Without it you can fit two bottles. With it, it reduces the depth of one section suitable for a cup, so you can fit it at the front or back. The rubber mats insulate noise (plastic on plastic) and heat.
08 March 2017, 07:23 AM
#9
Scooby Regular
Thread Starter
Join Date: Oct 2016
Location: Killin
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
The bottom of each section has a rubber mat.
The "cupholder insert" can be fitted either way around.
Without it you can fit two bottles. With it, it reduces the depth of one section suitable for a cup, so you can fit it at the front or back. The rubber mats insulate noise (plastic on plastic) and heat.
The "cupholder insert" can be fitted either way around.
Without it you can fit two bottles. With it, it reduces the depth of one section suitable for a cup, so you can fit it at the front or back. The rubber mats insulate noise (plastic on plastic) and heat.
I didn't realise it could be fitted either way round especially as in the pic it's a certain way.....I just presumed that's the way it goes.
