2.1 stroker forged build on classic engine
#1
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
2.1 stroker forged build on classic engine
hi all again,
you've probably seen my project, a mk1 escort with wrx engine and running gear, running around 320bhp (the WRXICO) well i took it round silverstone and it decided to pop a conrod through the block,
im now building a forged stroker engine and need a few tourqe numbers, can anyone tell me the tourqes for:-
eagle con rods with arp bolts?
engine halves bolts?
head bolts?
i have read a few different things for all these tourqes and it would be good to get the right ones, any help is appreciated,
thanks very much,
phil.
you've probably seen my project, a mk1 escort with wrx engine and running gear, running around 320bhp (the WRXICO) well i took it round silverstone and it decided to pop a conrod through the block,
im now building a forged stroker engine and need a few tourqe numbers, can anyone tell me the tourqes for:-
eagle con rods with arp bolts?
engine halves bolts?
head bolts?
i have read a few different things for all these tourqes and it would be good to get the right ones, any help is appreciated,
thanks very much,
phil.
Trending Topics
#8
Scooby Regular
iTrader: (1)
Hi Phil, first of all what an awesome car you have built I saw it in a magazine! Well being as you have posted this in the project section you may as well post up some piccies I'm particularly interested in the rear radiator setup and how well it works as I'm currently doing the same conversion on a pug 205!
Cheers james
Cheers james
#9
Scooby Regular
Thread Starter
Join Date: Jan 2007
Location: in the engine bay
Posts: 909
Likes: 0
Received 0 Likes
on
0 Posts
hhhmmm sounds an interesting build, the rad in the boot runs very well, its vertical with a scoop under the boot floor and theres intakes on the rear bubble arches for the half of the rad thats above the bootfloor, ill get some pics up for ya, you can look on youtube too at "mk1 escort WRXICO" have you got any vids on there or anythin on here of your build?
#12
Scooby Regular
iTrader: (1)
hhhmmm sounds an interesting build, the rad in the boot runs very well, its vertical with a scoop under the boot floor and theres intakes on the rear bubble arches for the half of the rad thats above the bootfloor, ill get some pics up for ya, you can look on youtube too at "mk1 escort WRXICO" have you got any vids on there or anythin on here of your build?
My 205 is in the project section on here if you want to have a butchers it's getting close to the end now!
James
Thread
Thread Starter
Forum
Replies
Last Post