UK Turbo 2000 in 74f
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2009
Location: High Wycombe
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
UK Turbo 2000 in 74f
So after getting rid of my rotten 1996 Turbo 2000 i had the chance to pick up the following car three owners from new with 80k on the clock
With the purchace price in mind i was able to source two doors and a wing in 74f for a reasonable price thanks Pete
Since this shot i have done a lot of work to the car starting with some styling mods first facelift fog lamp covers
Followed very shortly by a P1 Front splitter
Also Fitted my Old 17's from my previous scooby
Thats the styling done now onto the power and handling mods the car Went into FB Tuning for a service and Clutch change and treated to the full treatment
Exeady Pink Clutch and skimmed Flywheel
Millers Engine oil
NGK PFR7b plugs
Redline Shockproof Gearbox oil
Millers Dif oil
Full coolant change
After the service i was advised that the suspenction on the rear was worn and could do with a refresh so after much deliberation Full set of KYB excell-b's were purchased to be fitted with my Eibach Prodrive lowering springs
Also at this time i purchased a full set of ARB's from Scoobyparts
24mm Whiteline Rear ARB
22mm Whitline Front ARB
Whiteline Solid Rear Droplinks
Whiteline Wire Front Droplinks
Whiteline Anti lift kit
To be honest this was the best purchase that i have ever made in all the time of owning subarus's allowed for later braking and more complient handling
Then comes the plans for power after talking with FB tuning i was advised to begin gathering parts for power upgradeds
Parts were as follows
Apexi Power FC
Apexi AVC-R
K&N induction Kit
HRC 290l Fuel Pump
Q45 Maf
HDI GT2 FMIC (was fitted to previous car)
Scoobyparts 3 inch Bellmouth De-Cat Downpipe Wrapped
IHI VF35
So after much collection and Saving the time had come to have it all fitted and Mapped
Am so chuffed with the results after some confusion with the Fuel Pump this will be fitted and the map tweaked looking for 320-330BHP@1.4bar not sure on Torque figure more pics to follow
thanks for reading
With the purchace price in mind i was able to source two doors and a wing in 74f for a reasonable price thanks Pete
Since this shot i have done a lot of work to the car starting with some styling mods first facelift fog lamp covers
Followed very shortly by a P1 Front splitter
Also Fitted my Old 17's from my previous scooby
Thats the styling done now onto the power and handling mods the car Went into FB Tuning for a service and Clutch change and treated to the full treatment
Exeady Pink Clutch and skimmed Flywheel
Millers Engine oil
NGK PFR7b plugs
Redline Shockproof Gearbox oil
Millers Dif oil
Full coolant change
After the service i was advised that the suspenction on the rear was worn and could do with a refresh so after much deliberation Full set of KYB excell-b's were purchased to be fitted with my Eibach Prodrive lowering springs
Also at this time i purchased a full set of ARB's from Scoobyparts
24mm Whiteline Rear ARB
22mm Whitline Front ARB
Whiteline Solid Rear Droplinks
Whiteline Wire Front Droplinks
Whiteline Anti lift kit
To be honest this was the best purchase that i have ever made in all the time of owning subarus's allowed for later braking and more complient handling
Then comes the plans for power after talking with FB tuning i was advised to begin gathering parts for power upgradeds
Parts were as follows
Apexi Power FC
Apexi AVC-R
K&N induction Kit
HRC 290l Fuel Pump
Q45 Maf
HDI GT2 FMIC (was fitted to previous car)
Scoobyparts 3 inch Bellmouth De-Cat Downpipe Wrapped
IHI VF35
So after much collection and Saving the time had come to have it all fitted and Mapped
Am so chuffed with the results after some confusion with the Fuel Pump this will be fitted and the map tweaked looking for 320-330BHP@1.4bar not sure on Torque figure more pics to follow
thanks for reading
Last edited by KAOS_JNR; 21 May 2012 at 03:20 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post