GOLD PLATED DIY EARTH MOD FINISHED
#1
GOLD PLATED DIY EARTH MOD FINISHED
FINISHED A FEW MONTHS BACK NOW, 24 KRT Gold plated diy earth mod, using 4awg 100%oxy free copper wire, soldered and crimped ends, also Gold plated earth block, yes its OTT, but when hks are asking £120 for their kit, with the thinner 8wg copper wire, but they do use gold plated brkt, i decided to do it my self, my car is a my94 wrx-sti, what a diff it made, run,s alot smoother, noticed on the turn of the key it start,s easies, all round well pleased, plus with all rhe wire,s in red looks nice under the bonnet, below is a link for you to chek out, with pic,s if you interested in one of these kits mail me please at aopf74@dsl.pipex.com
you can make these a lot cheaper using normal parts from motor factor,s form anyware frm £20 up to £40 as most prob people will now post here saying how cheap they did it for, but these kits are really the dog,s dangly,s lol thanks mark, if the pic,s dont come up click on the index link on the site and take it from there, ok .
http://markmainwaring3092.photos.cn.com/c66144.html
and this one to,
http://markmainwaring3092.photos.cn.com/c70473.html
http://markmainwaring3092.photos.cn.com/c70473_13.html
hope you like
you can make these a lot cheaper using normal parts from motor factor,s form anyware frm £20 up to £40 as most prob people will now post here saying how cheap they did it for, but these kits are really the dog,s dangly,s lol thanks mark, if the pic,s dont come up click on the index link on the site and take it from there, ok .
http://markmainwaring3092.photos.cn.com/c66144.html
and this one to,
http://markmainwaring3092.photos.cn.com/c70473.html
http://markmainwaring3092.photos.cn.com/c70473_13.html
hope you like
Last edited by exesspeed; 13 March 2004 at 11:36 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM