205 GTi engine swap query
#1
205 GTi engine swap query
We have fitted a 1.9 engine into a 1.6 GTi and after maby hours of knuckle scratching at the weekend, have ended up with the following "problems" (only small things):
1) Oil pressure gauge not working.
2) Speedo not working.
Any ideas as we are stumped..........
Richard
1) Oil pressure gauge not working.
2) Speedo not working.
Any ideas as we are stumped..........
Richard
#3
Scooby Regular
Oil pressure gauge - clean the connections on the gauge senders, front of the block and also clean out the brown multiplug near the gearbox.
Speedo - both 1.6 and 1.9 boxes are the same design so should work. Just make sure the cable is pushed in far enough and that you have replaced the rubber pin that holds it in. Other than that you will need to check the back of the clocks which is a crapper of a job.
Speedo - both 1.6 and 1.9 boxes are the same design so should work. Just make sure the cable is pushed in far enough and that you have replaced the rubber pin that holds it in. Other than that you will need to check the back of the clocks which is a crapper of a job.
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM