DIY Rebuild / Restore / Modify Project
#1
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
My..Latest Project...
Well actually it belongs to my friend Andy, who spend a few nights helping me out with my car where he could.. and it was his 21st yesterday, so I best sort out his car for him..
92 ( i think) pug 106xsi with 106 gti engine in..
I started fitting the engine over a year ago, and it never got finished.. and its now a mess by everybody having a go.. soon to be finished..
Rear
Rear
Front
Engine (just )
Why did someone think they needed to bend this to fit the engine?
Engine mounting falling off (Now seam welded )
Same as above
Going to put this on with a roller (3 litres of 2pack Miami Blue)
Delocking it..
Lock removed
Screw tack welded on to hold plate..
Screw snapped off and rest welded up
Side
Side
Front Panel removed..
David
Well actually it belongs to my friend Andy, who spend a few nights helping me out with my car where he could.. and it was his 21st yesterday, so I best sort out his car for him..
92 ( i think) pug 106xsi with 106 gti engine in..
I started fitting the engine over a year ago, and it never got finished.. and its now a mess by everybody having a go.. soon to be finished..
Rear
Rear
Front
Engine (just )
Why did someone think they needed to bend this to fit the engine?
Engine mounting falling off (Now seam welded )
Same as above
Going to put this on with a roller (3 litres of 2pack Miami Blue)
Delocking it..
Lock removed
Screw tack welded on to hold plate..
Screw snapped off and rest welded up
Side
Side
Front Panel removed..
David
#4
Flip me!!
You should be doing this during the day you could make a mint with the speed you work at!!
I'd certainly pay you to work on my car.. I am useless with a spray gun..
JGM
You should be doing this during the day you could make a mint with the speed you work at!!
I'd certainly pay you to work on my car.. I am useless with a spray gun..
JGM
#5
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I would hope I do work fast on these, as I used to have one and know them inside out and backwards... what it doesnt show is that the passenger door is stripped of everything including glass, back window is out and most of the interior on the passenger side.
David
David
#6
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Engine lifted out for access.. (Was going to lift out.. but couldnt be bothered pulling driveshafts out..)
Damage.. to be hammered out..
Engine Back in Place..
Side
Side
Side again.
Rear
Front Side..
Engine mounting seam welded..
Shot from front, just been degreased...
1 Knackered David.
[Edited by David_Wallis - 11/14/2002 12:47:00 AM]
Damage.. to be hammered out..
Engine Back in Place..
Side
Side
Side again.
Rear
Front Side..
Engine mounting seam welded..
Shot from front, just been degreased...
1 Knackered David.
[Edited by David_Wallis - 11/14/2002 12:47:00 AM]
#7
Scooby Regular
iTrader: (1)
Join Date: Mar 2002
Location: Norn Iron
Posts: 2,786
Likes: 0
Received 0 Likes
on
0 Posts
How about another peugeot project.....
Cousre the owner is the doing the strange bodywork thing himself...not my cup of tea.
fitting a peugeot 406 2.0 turbo engine ( yep petrol??? ) It will still be slow though im sure. Tho it has a pretty big intercooler.
Still all looks very messy, and it is. A very unfinished project at the minute.
[Edited by ustolemyname??stevieturbo - 11/14/2002 1:28:56 AM]
Cousre the owner is the doing the strange bodywork thing himself...not my cup of tea.
fitting a peugeot 406 2.0 turbo engine ( yep petrol??? ) It will still be slow though im sure. Tho it has a pretty big intercooler.
Still all looks very messy, and it is. A very unfinished project at the minute.
[Edited by ustolemyname??stevieturbo - 11/14/2002 1:28:56 AM]
Trending Topics
#11
Scooby Regular
David,
Do you do this obn a regular basis? My Golf has come to a standstill as I can't find anyone to throw some front inner wings & paint at it. I had somebody lined up and they let me down.
Mail me at my profile addy if you are interested, I am quite prepared to trailer the car to Leeds if necessary
Do you do this obn a regular basis? My Golf has come to a standstill as I can't find anyone to throw some front inner wings & paint at it. I had somebody lined up and they let me down.
Mail me at my profile addy if you are interested, I am quite prepared to trailer the car to Leeds if necessary
#13
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Sorry no pics from last night, as I only did a bit more filling and some welding..
David
David
#15
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Cheers.. no pics as yet... pics of bowls of water and 600 wet & dry etc isnt much fun to look at...
I hate filling dents...
David.
I hate filling dents...
David.
#21
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
an advert
And I had to beat andy a few times at pool.. (dont know why someone took this)