Recommend me a power drill
#1
Recommend me a power drill
Looking for a new drill for boarding out my loft space, my Bosch unit has died a death and was never very good.
Criteria is
Must be cordless
Must work as screw driver
Prefer more than one battery
Around £100
I currently have a corded hammer drill so don't really need a hammer function too much.
It's only for occasional DIY use I'm no professional trades man.
What's the recommendations?
Criteria is
Must be cordless
Must work as screw driver
Prefer more than one battery
Around £100
I currently have a corded hammer drill so don't really need a hammer function too much.
It's only for occasional DIY use I'm no professional trades man.
What's the recommendations?
#4
Makita, you should pick one up for that money 14v ish.
Have got loads of makita bits and bobs and it lasts forever. See it as an investment.
Dewalt is ok but wont last as long.
Chop
Have got loads of makita bits and bobs and it lasts forever. See it as an investment.
Dewalt is ok but wont last as long.
Chop
Trending Topics
#8
Scooby Regular
iTrader: (1)
Have to agree with Chop. Makita all the way. Even though they're a little more pricey, it certainly pays to have more quality. All our tools are Makita and they're very robust and are taking knocks all the time. We use them on our farm and they always complete the task so just for general DIY purposes I can't see you having a problem at all.
Also a lot of tradesmen use Makita.
Also a lot of tradesmen use Makita.
#9
#11
Definatly won't go wrong with dewalt or makita, I'm a joiner and all my power tools are dewalt or makita, they are the best quality, personally I prefere makita over dewalt mostly because I don't like the bright yellow colour. B&Q do an 18v makita for £95, 1.3ah,2 batterys and a charger, it's the one I've got and they last years and take alot of abuse.
#12
Moderator
iTrader: (1)
Makita with a 3Ah Li-Ion battery pack.
Actually anything with Li-Ion....once you go Li-ion, you'll never go back to a Nicad or Ni-MH! Especially for occasional use - as they don't self discharge.
I had two batteries with mine....But I shouldn't have bothered. As its thats quick to charge and isn't bothered about memory effect etc. So I very rarely need the second battery pack
Actually anything with Li-Ion....once you go Li-ion, you'll never go back to a Nicad or Ni-MH! Especially for occasional use - as they don't self discharge.
I had two batteries with mine....But I shouldn't have bothered. As its thats quick to charge and isn't bothered about memory effect etc. So I very rarely need the second battery pack
Last edited by ALi-B; 18 January 2012 at 11:14 PM.
#13
Scooby Regular
Join Date: Feb 2006
Location: Bring back infractions!
Posts: 4,554
Likes: 0
Received 0 Likes
on
0 Posts
Makita with a 3Ah Li-Ion battery pack.
Actually anything with Li-Ion....once you go Li-ion, you'll never go back to a Nicad or Ni-MH! Especially for occasional use - as they don't self discharge.
I had two batteries with mine....But I shouldn't have bothered. As its thats quick to charge and isn't bothered about memory effect etc. So I very rarely need the second battery pack
Actually anything with Li-Ion....once you go Li-ion, you'll never go back to a Nicad or Ni-MH! Especially for occasional use - as they don't self discharge.
I had two batteries with mine....But I shouldn't have bothered. As its thats quick to charge and isn't bothered about memory effect etc. So I very rarely need the second battery pack
About £150 if you shop around: http://www.lawson-his.co.uk/scripts/...2018v%20Makita
#14
How often will you be using the drill though. If you are a tradesman, I would definitely go for the stuff mentioned above, but for occasional household use I'm sure something cheaper will do the job.
#17
Guest
Posts: n/a
If you do go for Makita you may as well pay the proper money - don't go for the ones with the orange batteries, the ones they normally have in B&Q for a 'bargain £99'. The orange batteries are the old NiCd ones - see posts above regarding battery technology.
Dave
#19
Scooby Regular
I have a Black&Decker corded hammer action drill and cordless drill driver. Both have got me through 8years of DIY. Sadly I just burnt the clutch bit out of the cordless(due to abuse) and the hammer action just doesn't cut the mustard trying to get through the concrete walls in my apartment - never had an issue with it and the walls in my last house.
#25
Scooby Regular
Makita every time
DeWalt are a close second, but I personally find Makita stuff more comfortable to hold and better balanced. Li-Ion is definitely the way forward too
DeWalt are a close second, but I personally find Makita stuff more comfortable to hold and better balanced. Li-Ion is definitely the way forward too
#26
Moderator
iTrader: (1)
I agree here. I'm one who'll look at the Makita stuff as 'it'll never let you down' etc etc and they are very good drills. But at the end of the day, how often are you really going to use it? Even for a large DIY project you'll probably use it less over a week than a 'tradesman' uses it in a morning so save your money and go for a Wickes drill, or a B&Q one.
If you do go for Makita you may as well pay the proper money - don't go for the ones with the orange batteries, the ones they normally have in B&Q for a 'bargain £99'. The orange batteries are the old NiCd ones - see posts above regarding battery technology.
Dave
If you do go for Makita you may as well pay the proper money - don't go for the ones with the orange batteries, the ones they normally have in B&Q for a 'bargain £99'. The orange batteries are the old NiCd ones - see posts above regarding battery technology.
Dave
My BHP452 is £100 as body-only without any batteries nor a charger and case. With a battery/charge/case its £150 and £200 for 2 batteries. Even though to buy the battery on its own they want to charge £70!!!
So fair to say the battery itself is not far from £50 a pop regardless of how good the drill is! (i.e a £50 drill could cost £100 due to its battery). Yes you can go cheaper, but as you say it'll be for a Ni-cad or Ni-Mh and a Sloooow 1hour+ charger.
I think we've all been there: Leave it for over a month without using it and all of the batteries will have mostly gone flat next time you need to use it.
One thing I will say is the standard Makita cases are poo - black painted cardboard with aluminum surround and a load of sponge prevening you putting any other tools and bits in The BHP453 in the above link seems to have a nice storage case Don't know what the difference between the BHP452 and BHP453 is though
PS The Makita BHP452 is not brilliant for very hard masonary/concrete unless used with only the best masonary bits (blunt or chrome plated - forget it! )....better off to have a cheap corded SDS drill for any tough stuff, to save abusing the cordless.
#27
You won't go wrong with one of these makitas
http://m.diy.com/mt/www.diy.com/nav/...ect#un_reviews
Lithium battery's are very good, but it's just a waste of money if it's only for occasional diy use.
http://m.diy.com/mt/www.diy.com/nav/...ect#un_reviews
Lithium battery's are very good, but it's just a waste of money if it's only for occasional diy use.
#28
OAP's can also get 10% off aswell on certain days at B&Q, take your gran along for a trip out and everyone's a winner!
Last edited by trio; 19 January 2012 at 04:12 PM.
#30
Moderator
iTrader: (1)
You won't go wrong with one of these makitas
http://m.diy.com/mt/www.diy.com/nav/...ect#un_reviews
Lithium battery's are very good, but it's just a waste of money if it's only for occasional diy use.
http://m.diy.com/mt/www.diy.com/nav/...ect#un_reviews
Lithium battery's are very good, but it's just a waste of money if it's only for occasional diy use.
Wrong IMO, after having all tyes of batteries in drills
Lithion is BETTER suited for diy/occasional use.
Just don't deep discharge them.
Last edited by ALi-B; 19 January 2012 at 04:50 PM.