Any good Tv Repairs in Wycombe?
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: High Wycombe
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Any good Tv Repairs in Wycombe?
I have have a Panasonic 28inch tv model No TX-28DK2 just today the problem start when you switch it on you can hear bleeping noise for about 2mins then it goes into standby mode. there is no picture only a black screen
the standby light is solid red. the tv is 2years old.
Thanks
the standby light is solid red. the tv is 2years old.
Thanks
#2
Scooby Regular
Join Date: Dec 2003
Location: South Bucks
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2old4this
I have have a Panasonic 28inch tv model No TX-28DK2 just today the problem start when you switch it on you can hear bleeping noise for about 2mins then it goes into standby mode. there is no picture only a black screen
the standby light is solid red. the tv is 2years old.
Thanks
the standby light is solid red. the tv is 2years old.
Thanks
Welcome to scoobynet by the way.
#3
Scooby Regular
iTrader: (1)
The tv is in trip mode, this mode comes into operation if the power supply section is either in excess current or over voltage state. The causes can be varied from a failed line op transistor,transformer and associated components, failed sound o/p, field op stage, these are all high current/power stages. Or if you unlucky the microprocessor section is causing wierd trip problems
Andy ex tv engineer and glad to be out
Andy ex tv engineer and glad to be out
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM